Click here

CLOCK (w/ Multi-information Display) INSTALLATION

Click here
Click here
  1. Click here

    INSTALL MULTI INFORMATION DISPLAY CLOCK ASSEMBLY

  2. Click here

    INSTALL NO. 2 RADIO BRACKET (w/o Navigation System)


    1. A017CMI

      Install the No. 2 radio bracket with the 5 screws.

  3. Click here

    INSTALL NO. 2 RADIO RECEIVER BRACKET (w/ Navigation System)


    1. A017F9I

      Install the No. 2 radio bracket with the 6 screws.

  4. Click here

    INSTALL NO. 2 RADIO BRACKET (w/o Radio Receiver)


    1. A017CLK

      Install the No. 2 radio bracket with the 3 screws.

  5. Click here

    INSTALL NO. 1 RADIO BRACKET (w/o Navigation System)


    1. A017FNU

      Install the No. 1 radio bracket with the 5 screws.

    2. A017GBL

      Engage the claw and install the connector.

  6. Click here

    INSTALL NO. 1 RADIO RECEIVER BRACKET (w/ Navigation System)


    1. A017DOO

      Install the No. 1 radio bracket with the 6 screws.

    2. A017GBL

      Engage the claw and connect the connector.

  7. Click here

    INSTALL NO. 1 RADIO BRACKET (w/o Radio Receiver)


    1. A017FUY

      Install the No. 1 radio bracket with the 6 screws.

  8. Click here

    INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System)


    1. Connect each connector.

    2. A017EFV

      Engage the 4 clips.

    3. A017FXP

      Install the radio receiver assembly with bracket with the 4 bolts.

  9. Click here

    INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)


    1. Connect each connector.

    2. A017CTX

      Engage the 4 clips.

    3. A017EUS

      Install the navigation receiver assembly with bracket with the 4 bolts.

  10. Click here

    INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY WITH BRACKET (w/o Radio Receiver)


    1. Connect each connector.

    2. A017C93

      Engage the 4 clips.

    3. Install the integration control and panel assembly with bracket with the 4 bolts <D>.

  11. Click here

    INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY (for Manual Air Conditioning System)


    1. Connect the connector.

    2. A017G04

      Engage the 4 clips and install the heater control and accessory assembly.

  12. Click here

    INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)


    1. Connect the connector.

    2. A017EE0

      Engage the 4 clips and install the air conditioning control assembly.

  13. Click here

    INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Smart Entry and Start System)


    1. A017EYQE01

      Apply protective tape to the areas shown in the illustration.

    2. Connect each connector.

    3. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

      Note:

      Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.

  14. Click here

    INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Entry and Start System)


    1. A017D5UE01

      Apply protective tape to the areas shown in the illustration.

    2. Connect each connector.

    3. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

      Note:

      Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.

  15. Click here

    INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A017DC8

      Engage the 2 claws and 5 clips, and install the center instrument panel register assembly.