Click here

STEERING PAD SWITCH INSPECTION

Click here
Click here
  1. Click here

    INSPECT STEERING PAD SWITCH ASSEMBLY


    1. Disconnect steering pad switch assembly connector A from the steering pad.

    2. A017CNRE01

      Disconnect steering pad switch assembly connector B from the spiral cable.

    3. Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester connection Condition Specified condition
      A-1 - B-1 (HO) Always Below 1 Ω

      If the result is not as specified, replace the steering pad switch assembly.