PARKING ASSIST MONITOR SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

VEHICLE BROUGHT TO WORKSHOP

NEXT

CUSTOMER PROBLEM ANALYSIS

NEXT

INSPECT BATTERY VOLTAGE

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT

CHECK CAN COMMUNICATION SYSTEM*

Refer to HOW TO PROCEED WITH TROUBLESHOOTING Click here.

1. Check for output DTCs.

   Result
   Result Proceed to CAN DTC is not output A CAN DTC is output B

   
   

   B

   PROCEED TO "CAN COMMUNICATION SYSTEM" Click here

   A

CHECK DTC OF NAVIGATION SYSTEM

1. Refer to the diagnostic check/clear of the navigation system Click here.

   Result
   Result Proceed to DTC is not output A DTC is output B

   
   

   B

   PROCEED TO " NAVIGATION SYSTEM" Click here

   A

CHECK DTC

1. Refer to the diagnostic check/clear Click here.

   Result
   Result Proceed to DTC is not output A DTC is output B

   
   

   B

   PROCEED TO DTC CHART Click here

   A

CHECK IF SAME SYMPTOM APPEARS IN NAVIGATION SYSTEM

1. Refer to the navigation system Click here.

   Result
   Result Proceed to Symptom does not appear A Symptom appears B

   
   

   B

   FOLLOW NAVIGATION SYMPTOM CHART TO PERFORM TROUBLESHOOTING

   A

PROBLEM SYMPTOMS TABLE

1. Find the applicable symptom in the problem symptoms table Click here.

   Result
   Result Proceed to Fault is not listed in problem symptoms table A Fault is listed in problem symptoms table B

   Tech Tips

   If the symptom does not recur and no code is output, perform the symptom reproduction method Click here.

   
   

   B

   GO TO STEP 10

   A

OVERALL ANALYSIS AND TROUBLESHOOTING

1. Terminals of ECU Click here

   
   

   NEXT

ADJUST, REPAIR OR REPLACE

NEXT