REAR VIEW MONITOR SYSTEM (w/ Navigation System) HOW TO PROCEED WITH TROUBLESHOOTING


  1. VEHICLE BROUGHT TO WORKSHOP


    NEXT

  2. CUSTOMER PROBLEM ANALYSIS


    NEXT

  3. CHECK AND CLEAR DTCs


    1. Refer to the diagnostic check/clear Click here.


      NEXT

  4. PROBLEM SYMPTOM CONFIRMATION


    SYMPTOM DOES NOT OCCUR (Go to step 5)

    SYMPTOM OCCURS (Go to step 6)

  5. SYMPTOM SIMULATION


    NEXT

  6. CHECK DTC


    DTC IS OUTPUT (Go to step 10)

    DTC IS NOT OUTPUT (Go to step 7)

  7. CHECK IF THE SAME SYMPTOM APPEARS IN THE NAVIGATION SYSTEM


    1. Refer to the navigation system Click here.


      THE SYMPTOM APPEARS (FOLLOW THE NAVIGATION SYMPTOM CHART TO PERFORM TROUBLESHOOTING)

      THE SYMPTOM DOES NOT APPEAR (Go to step 8)

  8. PROBLEM SYMPTOMS TABLE


    1. Refer to the problem symptoms table Click here.


      THE CORRESPONDING SYMPTOM EXISTS (Go to step 10)

      THE CORRESPONDING SYMPTOM DOES NOT EXIST (Go to step 9)

  9. BASED ON THE MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW


    1. Terminals of ECU Click here


      NEXT

  10. ADJUST, REPAIR OR REPLACE


    NEXT

  11. CONFIRMATION TEST


    NEXT
    END