NAVIGATION SYSTEM (for HDD) CD Sound Skips

INSPECTION PROCEDURE

PROCEDURE

1. Click here

   CHECK CD

   
   
   1. 

      Check that the CD is not deformed or cracked.

      OK
      No deformation or cracks on the CD

   
   
   • OKClick here
   • NGClick here
2. Click here

   CHECK CD

   
   
   1. 

      Check the CD.

      OK
      The CD is clean.

      Note:

      Do not use a conventional record cleaner or anti-static preservative.

      Tip:

      If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

   
   
   • OKClick here
   • NGClick here
3. Click here

   CHECK OPERATION WITH ANOTHER CD

   
   

   1. Check using another CD.

      
      

      1. Check if the problem recurs using another CD.

         OK
         The problem does not occur.

   
   
   • OKClick here
   • NGClick here
4. Click here

   CD WAS FAULTY

5. Click here

   CHECK NAVIGATION RECEIVER ASSEMBLY

   
   

   1. Check the navigation receiver assembly installation condition.

      
      

      1. Check that the navigation receiver assembly is properly installed.

         OK
         The navigation receiver assembly is properly installed.

   
   
   • OKClick here
   • NGClick here
6. Click here

   REPLACE NAVIGATION RECEIVER ASSEMBLYClick here

7. Click here

   CD IS FAULTY

8. Click here

   CLEAN CD

9. Click here

   REINSTALL NAVIGATION RECEIVER ASSEMBLY PROPERLY