NAVIGATION SYSTEM (for HDD) CD cannot be Inserted / Played or CD is Ejected Right After Insertion

INSPECTION PROCEDURE

PROCEDURE

1. CHECK IF A PROPER CD IS INSERTED

   
   

   1. Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

      OK
      CD is normal.

      Tech Tips

      
      

      • Translucent or uniquely-shaped CDs cannot be played.

      • Commercial audio CDs can be played.

      • CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • For details on playable CDs, refer to the Owner's Manual.

   
   

   NG

   CD IS FAULTY

   OK

2. CHECK THAT CD IS INSERTED PROPERLY

   
   

   1. Check whether or not the CD is inserted upside down.

      OK
      CD is properly inserted.

   
   

   NG

   SET CD PROPERLY

   OK

3. CLEAN CD AND RECHECK

   
   

   1. 

      Disc cleaning

      
      

      1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

         OK
         Malfunction disappears.

         Note

         Do not use a conventional record cleaner or anti-static preservative.

   
   

   NG

   CHECK OPERATION WITH ANOTHER CD Click here

   OK

   END (CD WAS DIRTY)

4. CHECK OPERATION WITH ANOTHER CD

   
   

   1. Check using another CD.

      
      

      1. Check if the problem recurs using another CD.

         OK
         The problem does not occur.

   
   

   NG

   REPLACE NAVIGATION RECEIVER ASSEMBLY Click here

   OK

   CD WAS FAULTY