NAVIGATION SYSTEM (for DVD) Vehicle Position Mark is not Updated

Click here

INSPECTION PROCEDURE

Click here

PROCEDURE

1. Click here

   CHECK MAP DISC

   
   
   1. 

      Check that the map disc is not deformed or cracked.

      OK
      No deformations or cracks on the map disc.

   
   
   • OKClick here
   • NGClick here
2. Click here

   REPLACE MAP DISC

3. Click here

   CHECK NAVIGATION DISPLAY

   
   

   1. Check if a touch scroll can be performed on the map display.

      OK
      Touch scroll can be performed.

   
   
   • OKClick here
   • NGClick here
4. Click here

   PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLEClick here

5. Click here

   CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)

   
   
   1. 

      Enter the "Navigation Check" mode (Vehicle Sensors) (Click here).

   2. While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check if these readings are almost equal.

      OK
      The readings are almost equal.

   
   
   • OKClick here
   • NGClick here
6. Click here

   GO TO "SPEED SIGNAL DOES NOT CHANGE IN NAVIGATION CHECK MODE" IN PROBLEM SYMPTOMS TABLEClick here

7. Click here

   PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLEClick here