NAVIGATION SYSTEM (for DVD) Vehicle Position Mark Deviates Greatly

INSPECTION PROCEDURE

PROCEDURE

1. CHECK GPS MARK

   
   
   1. 

      Text in Illustration

      *a

      Example

      Check that the GPS mark is displayed.

      OK
      GPS mark is displayed.

   
   

   NG

   GO TO "GPS MARK IS NOT DISPLAYED" IN PROBLEM SYMPTOMS TABLE Click here

   OK

2. CHECK VEHICLE SENSOR (OPERATION CHECK)

   
   

   1. 

      Enter the "Vehicle Sensors" screen (Check GPS&Vehicle Sensors) Click here.

   2. While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check if these readings are almost equal.

      OK
      The readings are almost equal.

   
   

   NG

   CHECK DTC OUTPUT Click here

   OK

3. CHECK VEHICLE SIGNAL (OPERATION CHECK)

   
   

   1. Enter the "Vehicle Signal Check Mode" screen (Check Vehicle Signal) Click here.

   2. 

      Check that the display changes between ON and OFF according to the shift lever operation.

      OK
      Shift Lever Position Display except R OFF R ON

      Tech Tips

      The display is updated once per second. It is normal for the display to lag behind the actual switch operation.

   
   

   NG

   GO TO "REVERSE SIGNAL DOES NOT CHANGE IN NAVIGATION CHECK MODE" IN PROBLEM SYMPTOMS TABLE Click here

   OK

   PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here