NAVIGATION SYSTEM (for DVD) Cellular Phone cannot Send/Receive

INSPECTION PROCEDURE

PROCEDURE

1. Click here

   CHECK "BLUETOOTH" SETTINGS

   
   

   1. Check if the "Bluetooth" settings are correct.

      OK
      "Bluetooth" settings are correct.

   
   
   • OKClick here
   • NGClick here
2. Click here

   SET SETTINGS CORRECTLY

3. Click here

   CHECK CELLULAR PHONE

   
   

   1. Check if the cellular phone is "Bluetooth" compatible.

      Tip:

      Some versions of "Bluetooth" compatible cellular phones may not function.

      OK
      The phone is "Bluetooth" compatible.

   
   
   • OKClick here
   • NGClick here
4. Click here

   END (ONLY A "BLUETOOTH" COMPATIBLE CELLULAR PHONE CAN BE USED)

5. Click here

   CHECK SETTINGS

   
   

   1. Check if the cellular phone functions.

      Tip:

      The cellular phone is unable to call under any of the following conditions:

      
      

      • The cellular phone is locked.

      • The directory is being transferred.

      • The line is crossed.

      • Outside service range.

      • The power is off.

      • The cellular phone is not connected to "Bluetooth" ("BT" is displayed while connected).

        OK
        None of the above conditions exist.

   
   
   • OKClick here
   • NGClick here
6. Click here

   SET CORRECTLY

7. Click here

   CHECK CELLULAR PHONE

   
   

   1. Check if the cellular phone can make a call.

      Tip:

      When the battery is low, calls cannot be made or received.

      OK
      Cellular phone can make a call.

   
   
   • OKClick here
   • NGClick here
8. Click here

   REPAIR OR REPLACE CELLULAR PHONE

9. Click here

   CHECK RECEPTION

   
   

   1. Set the cellular phone so that it can receive calls.

   2. Place the cellular phone close to the radio and navigation assembly.

   3. Check if the cellular phone has reception according to the navigation receiver assembly.

      OK
      The cellular phone has reception.

   
   
   • OKClick here
   • NGClick here
10. Click here

    REPLACE NAVIGATION RECEIVER ASSEMBLYClick here

11. Click here

    PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLEClick here