NAVIGATION SYSTEM (for DVD) CD cannot be Inserted / Played or CD is Ejected Right After Insertion

INSPECTION PROCEDURE

PROCEDURE

1. Click here

   CHECK IF A PROPER CD IS INSERTED

   
   

   1. Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, deteriorated, or otherwise defective.

      OK
      The CD is normal.

      Tip:
      

      • Translucent or uniquely-shaped CDs cannot be played.

      • Commercial audio CDs can be played.

      • CD-DA files on CD-ROMs, CD-Rs, and CD-RWs can be played.

      • MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • For details on playable CDs, refer to the Owner's Manual.

   
   
   • OKClick here
   • NGClick here
2. Click here

   CHECK THAT CD IS INSERTED PROPERLY

   
   

   1. Check whether or not the CD is inserted upside down.

      OK
      CD is properly inserted.

   
   
   • OKClick here
   • NGClick here
3. Click here

   CHECK CD

   
   
   1. 

      Clean the disc by wiping it with a soft cloth from the inside to the outside in a radial direction.

      Note:

      Do not use a conventional record cleaner or anti-static preservative.

   
   
   • OKClick here
   • NGClick here
4. Click here

   REPLACE CD WITH ANOTHER AND RECHECK

   
   

   1. Replace the CD with a normal one and check that the same trouble does not occur.

      OK
      The same trouble does not occur.

   
   
   • OKClick here
   • NGClick here
5. Click here

   CD IS FAULTY

6. Click here

   SET CD PROPERLY

7. Click here

   CD WAS DIRTY

8. Click here

   REPLACE NAVIGATION RECEIVER ASSEMBLYClick here