INSTRUMENT PANEL SPEAKER INSTALLATION


  1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY


    1. A017CR7

      Connect the connector.

    2. Install the front No. 2 speaker assembly with the 2 bolts.

  2. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


    1. A017EVH

      Engage the 2 guides.

    2. Engage the 2 claws and 2 clips, and install the No. 1 instrument panel speaker panel sub-assembly.

  3. INSTALL FRONT PILLAR GARNISH


    1. A017BX5E01

      Remove the protective cover.

    2. A017BTZE01

      Install a new clip <A> on the front pillar garnish LH.

    3. Engage the 3 guides and 2 clips, then install the front pillar garnish LH.

  4. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP


    1. A017EEJE01

      Align the alignment mark (blue) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip LH.

      Note

      After installation, check that the corners fit correctly.