RADIO RECEIVER INSTALLATION


  1. INSTALL RADIO RECEIVER ASSEMBLY

  2. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A017E6N

      Engage the 2 clips and install the integration control and panel assembly.

    2. A017E42

      Engage the claw and connect the connector.

  3. INSTALL NO. 2 RADIO BRACKET (w/o Multi-information Display)


    1. A017BHI

      Install the No. 2 radio bracket with the 4 screws.

  4. INSTALL NO. 2 RADIO BRACKET (w/ Multi-information Display)


    1. A017CMI

      Install the No. 2 radio bracket with the 5 screws.

  5. INSTALL NO. 1 RADIO BRACKET (w/o Multi-information Display)


    1. A017E7U

      Install the No. 1 radio bracket with the 4 screws.

    2. A017GBL

      Engage the claw and install the connector.

  6. INSTALL NO. 1 RADIO BRACKET (w/ Multi-information Display)


    1. A017FNU

      Install the No. 1 radio bracket with the 5 screws.

    2. A017GBL

      Engage the claw and install the connector.

  7. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. Connect each connector.

    2. A017EFV

      Engage the 4 clips.

    3. A017FXP

      Install the radio receiver assembly with bracket with the 4 bolts.

  8. INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY (for Manual Air Conditioning System)


    1. Connect the connector.

    2. A017G04

      Engage the 4 clips and install the heater control and accessory assembly.

  9. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)


    1. Connect the connector.

    2. A017EE0

      Engage the 4 clips and install the air conditioning control assembly.

  10. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Smart Entry and Start System)


    1. A017EYQE01

      Apply protective tape to the areas shown in the illustration.

    2. Connect each connector.

    3. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

      Note

      Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.

  11. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Entry and Start System)


    1. A017D5UE01

      Apply protective tape to the areas shown in the illustration.

    2. Connect each connector.

    3. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

      Note

      Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.

  12. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A017DC8

      Engage the 2 claws and 5 clips, and install the center instrument panel register assembly.