Tech Tips
Use the table below to help determine the cause of a problem. The likely causes of the problem are indicated in descending order. Check each suspected area in order. Repair or replace faulty parts or perform adjustments as necessary.
| Symptom | Suspected Area | See page |
|---|---|---|
| Pressing power switch does not turn on system. | Proceed to "Pressing Power Switch does not Turn on System" | |
| Radio receiver power source circuit | ||
| Radio receiver | ||
| Panel switch does not function. | Steering pad switch circuit | |
| Radio receiver | ||
| No sound can be heard from speakers. (Audio is mute.) | Radio receiver power source circuit | |
| Proceed to "No Sound can be Heard from Speakers" | ||
| Speaker circuit | ||
| Radio receiver | ||
| Sound quality is bad in all modes. (Volume is too low.) | Proceed to "Poor Sound Quality in All Modes (Low Volume)" | |
| Speaker circuit | ||
| Radio receiver | ||
| ASL does not function. | Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter" | |
| Abnormal noise occurs. | Proceed to "Noise occurs" | |
| Radio receiver | ||
| Radio broadcast cannot be received or poor reception. | Proceed to "Radio Broadcast cannot be Received or Poor Reception" | |
| CD cannot be inserted / played or CD is ejected right after insertion. | Radio receiver power source circuit | |
| Proceed to "CD cannot be Inserted / Played or CD is Ejected Right After Insertion" | ||
| CD cannot be ejected. | Radio receiver power source circuit | |
| Proceed to "CD cannot be Ejected" | ||
| Sound quality is bad only when CD is played. (Volume is too low.) | Proceed to "Sound Quality is Bad Only when CD is Played (Volume is Too Low)" | |
| CD sound skips. | Proceed to "CD Sound Skips" | |
| Radio receiver cannot be illuminated at night. | Illumination circuit | |
| Radio receiver |
| Symptom | Suspected Area | See page |
|---|---|---|
| Audio system cannot be operated with steering pad switch. | Steering pad switch circuit | |
| Radio receiver | ||
| Steering pad switch cannot be illuminated at night. | Illumination circuit | |
| Radio receiver |