| DTC Code | DTC Name |
|---|---|
| CB-10 | System Microcomputer Malfunction |
| CB-11 | Media Interface Microcomputer Malfunction |
| CB-12 | CD-LSI Malfunction |
DESCRIPTION
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| CB-10 | System microcomputer malfunction |
|
| CB-11 | Media interface microcomputer malfunction | |
| CB-12 | CD-LSI (Large Scale Integration) malfunction |
PROCEDURE
REPLACE USB DEVICE OR "iPod"
Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
Turn the ignition switch off.
When one of these DTCs has been stored, it is necessary to turn off the ignition switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the ignition switch to ACC.
Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
CLEAR DTC
Clear the DTCs (Click here).
RECHECK FOR DTC
Recheck for DTCs and check if the same DTC is output again.
If DTCs are detected frequently, replace the multi-media interface ECU.
| OK |
|---|
| No DTCs are output. |
USB DEVICE OR "iPod" WAS DEFECTIVE
REPLACE MULTI-MEDIA INTERFACE ECUClick here