STEERING PAD SWITCH INSPECTION


  1. INSPECT STEERING PAD SWITCH


    1. Measure the resistance according to the value(s) in the table below.

      A017FCGE06
      Standard resistance
      Tester Connection Condition Specified Condition
      z2-7 (DISP) - z2-8 (EAU) DISP switch is not pushed in 10 kΩ or higher
      z2-7 (DISP) - z2-8 (EAU) DISP switch is pushed in Below 1 Ω

      Tech Tips

      If the value is not as specified, replace the steering pad switch Click here.