WIRELESS DOOR LOCK BUZZER INSTALLATION


  1. INSTALL WIRELESS DOOR LOCK BUZZER


    1. A017EJJ

      Connect the connector.

    2. Install the wireless door lock buzzer with the clamp.

  2. INSTALL FRONT FENDER LINER LH


    1. A017CTK

      Install the front fender liner LH with the 5 clips and 8 screws.

    2. A017F68

      Install 2 new grommets.

    3. Using a 4 mm hexagon wrench, install the 2 screws.

    4. A017B3D

      Install the screw and pin hold clip.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  3. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY LH


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the front fender side protector from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A017BKRE01

      Clean the front fender moulding sub-assembly. (If reusing the front fender moulding sub-assembly)


      1. Using a heat light, heat the front fender moulding sub-assembly.

      2. Remove the front fender side protector from the front fender moulding sub-assembly.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Install a new front fender side protector to the the front fender moulding sub-assembly.

    3. Install 2 new No. 4 clips on the front fender moulding sub-assembly.

    4. Install a new pad on the front fender moulding sub-assembly.

    5. A017C5R

      Install the front fender moulding sub-assembly.


      1. Using a heat light, heat the vehicle body and the front fender moulding sub-assembly.

      2. Remove the release paper from the front fender moulding sub-assembly.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Engage the 3 clips and install the front fender moulding sub-assembly.

    6. A017F6U

      Using a 4 mm hexagon wrench, install the screw.

    7. Install the clip.

  4. INSTALL NO. 1 ENGINE UNDER COVER


    1. A017B8T

      Install the No. 1 engine under cover with the 6 bolts and 2 clips.