WIRELESS DOOR LOCK BUZZER REMOVAL

REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH

1. 

   Remove the clip.

2. Using a 4 mm hexagon wrench, remove the screw.

3. 

   Peel off the double-sided tape and disengage the 3 clips, and then remove the front fender moulding sub-assembly.

4. Remove the pad from the front fender moulding sub-assembly.

5. Remove the 2 No. 4 clips from the front fender moulding sub-assembly.

6. 

   Remove the double-sided tape from the front fender moulding sub-assembly.

   Table 1. Text in Illustration

   *1	Double-sided Tape

REMOVE FRONT FENDER LINER LH

1. 

   Remove the screw.

2. Using a screwdriver, turn the pin 90 degrees and remove the 2 pin hold clips.

3. 

   Using a 4 mm hexagon wrench, remove the 2 screws.

4. Remove the 3 grommets.

   Tip:

   The grommets need to be replaced with new ones because they will break when they are removed.

5. 

   Remove the 5 clips.

6. Remove the bolt, 8 screws and front fender liner LH.