WIRELESS DOOR LOCK BUZZER REMOVAL


  1. REMOVE NO. 1 ENGINE UNDER COVER


    1. A017B8T

      Remove the 6 bolts, 2 clips and No. 1 engine under cover.

  2. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH


    1. A017F6U

      Remove the clip.

    2. Using a 4 mm hexagon wrench, remove the screw.

    3. A017C5R

      Peel off the front fender side protector and disengage the 3 clips, and then remove the front fender moulding sub-assembly.

    4. Remove the pad from the front fender moulding sub-assembly.

    5. Remove the 2 No. 4 clips from the front fender moulding sub-assembly.

    6. A017BKRE01

      Remove the front fender side protector from the front fender moulding sub-assembly.

  3. REMOVE FRONT FENDER LINER LH


    1. A017ERME01

      Remove the screw.

    2. Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

    3. A017F68

      Using a 4 mm hexagon wrench, remove the 2 screws.

    4. Remove the 2 grommets.

      Tech Tips

      The grommets need to be replaced with new ones because they will break when they are removed.

    5. A017CTK

      Remove the 5 clips, 8 screws and front fender liner LH.

  4. REMOVE WIRELESS DOOR LOCK BUZZER


    1. A017EJJ

      Disconnect the connector.

    2. Remove the clamp and the wireless door lock buzzer.