ELECTRICAL KEY OSCILLATOR (for Front Side) INSTALLATION


  1. INSTALL ELECTRICAL KEY OSCILLATOR


    1. A017FPX

      Connect the connector.

    2. Install the indoor electrical key oscillator with the clamp.

  2. INSTALL CONSOLE BOX ASSEMBLY (w/o Rear Air Conditioning System)


    1. A017G3R

      Engage the 6 claws.

    2. A017E57

      Install the console box assembly with the 4 bolts and 2 screws.

  3. INSTALL CONSOLE BOX ASSEMBLY (w/ Rear Air Conditioning System)


    1. A017E8O

      Engage the 6 claws.

    2. Connect the connector.

    3. A017C3F

      Install the console box assembly with the 4 bolts and 2 screws.

  4. INSTALL LOWER REAR CONSOLE BOX


    1. Install the lower rear console box.

  5. INSTALL NO. 2 CONSOLE BOX DUCT (w/o Rear Air Conditioning System)


    1. A017F5N

      Install the No. 2 console box duct as shown in the illustration.

  6. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A017FDP

      Connect the connector.

    2. Engage the 4 claws and 4 clips, and install the upper console panel sub-assembly.

  7. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. A017D5UE01

      Apply protective tape to the areas shown in the illustration.

    2. Connect each connector.

    3. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

      Note

      Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.