METER / GAUGE SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch on (IG) and turn the intelligent tester on.

    3. Enter the following menus: Body Electrical / Trouble Codes.

    4. Check for DTCs.

  2. CLEAR DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch on (IG) and turn the intelligent tester on.

    3. Enter the following menus: Body Electrical / Trouble Code.

    4. Erase DTCs by pressing the YES button on the tester.