REAR DOOR LOCK INSPECTION


  1. INSPECT REAR DOOR LOCK ASSEMBLY LH


    1. A017CFGE01

      Apply the battery voltage to the door lock motor and check the operation of the door lock motor.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 4

      Battery negative (-) → Terminal 1

      		 Locked

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 4

      		 Unlocked

      If the result is not as specified, replace the door lock assembly.

    2. Measure the resistance of the door lock position switch.

      Standard resistance
      Tester Connection Measurement Condition Door Lock Condition Specified Condition
      6 - 9

      Battery positive (+) → Terminal 4

      Battery negative (-) → Terminal 1

      		 Locked 10 kΩ or higher
      6 - 9

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 4

      		 Unlocked Below 1 Ω

      If the result is not as specified, replace the door lock assembly.

  2. INSPECT REAR DOOR LOCK ASSEMBLY RH


    1. A017F08E01

      Apply the battery voltage to the door lock motor and check the operation of the door lock motor.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 4

      Battery negative (-) → Terminal 1

      		 Locked

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 4

      		 Unlocked

      If the result is not as specified, replace the door lock assembly.

    2. Measure the resistance of the door lock position switch.

      Standard resistance
      Tester Connection Measurement Condition Door Lock Condition Specified Condition
      6 - 9

      Battery positive (+) → Terminal 4

      Battery negative (-) → Terminal 1

      		 Locked 10 kΩ or higher
      6 - 9

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 4

      		 Unlocked Below 1 Ω

      If the result is not as specified, replace the door lock assembly.