DOOR CONTROL TRANSMITTER (w/o Smart Entry and Start System) INSTALLATION


  1. INSTALL TRANSMITTER BATTERY (for LHD)


    1. A017D4Z

      Install a battery (lithium battery: CR2032) with the positive (+) side facing upward as shown in the illustration.

      Note


      • Be careful not to bend the terminals of the transmitter battery during installation.

      • Keep the interior of the transmitter case free of dust, water and oil.

    2. A017FCJ

      Install the transmitter housing case.

  2. INSTALL TRANSMITTER BATTERY (for RHD)


    1. A017FO8

      Install a new battery (lithium battery) with the positive (+) side up, as shown in the illustration.

    2. A017BG7

      Press down gently on the battery to set it in place.

      Note


      • Be careful not to bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

    3. A017FL2

      Install the case securely.