DOOR CONTROL TRANSMITTER (w/o Smart Entry and Start System) REMOVAL


  1. REMOVE TRANSMITTER BATTERY (for LHD)


    1. A017C7BE01

      Remove the transmitter battery.


      1. Using a screwdriver with its tip wrapped with protective tape, pry open the transmitter hosing case.

    2. A017D4Z

      Remove the transmitter battery (lithium battery: CR2032) from the transmitter hosing cover.

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the battery. The terminals may become damaged.

      • Do not touch the battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. It may cease to work.

  2. REMOVE TRANSMITTER BATTERY (for RHD)

    Note

    Special caution should be taken for handling each component as they are precision electronic components.


    1. A017F4Z

      Using a screwdriver with its tip wrapped with protective tape, pry open the transmitter housing cover.

      Note

      Do not forcibly pry the cover.

    2. A017DXE

      Remove the battery (lithium battery).

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the battery. The terminals may become damaged.

      • Do not touch the battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. It may cease to work.