DOOR CONTROL TRANSMITTER (w/ Smart Entry and Start System) INSTALLATION


  1. INSTALL TRANSMITTER BATTERY


    1. A017DAV

      Install a new battery (lithium battery) with the positive (+) side up as shown in the illustration.

    2. A017D3Q

      Press down gently on the battery to set it in place.

      Note


      • Be sure that the positive and negative sides of the transmitter battery are positioned correctly.

      • Be careful not to bend the terminals of the transmitter battery during installation.

      • Keep the interior of the transmitter case free of dust, water, and oil.

    3. A017B95

      Install the cover by pressing it as shown in the illustration.

    4. A017CR8

      Install the mechanical key.

      Tech Tips

      After the installation, press one of the transmitter switches and check that the LED illuminates.