Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that customization of the function(s) is possible.
Be sure to record the current settings before customizing.
When troubleshooting a function, first make sure that the function is not set to OFF.
CUSTOMIZE
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the tester on.
Enter the following menus:
Select: Body / MAIN BODY or Entry&Start / Utility / Customize /
Select the setting by referring to the table below.
| Display (Item) | Default | Contents | Setting |
|---|---|---|---|
| Wireless Control | ON | ON/OFF of wireless door lock function | ON/OFF |
| Hazard Answer Back | ON | When LOCK switch on transmitter pressed, all hazard warning lights illuminate once. When UNLOCK switch pressed, all hazard warning lights illuminate twice | ON/OFF |
| Wireless Buzzer Resp*1 |
ON | Function that makes wireless buzzer sound for answer-back when transmitter LOCK/UNLOCK switch pressed | ON/OFF |
| Open Door Warning | ON | If door is not completely closed and transmitter LOCK switch is pressed, this function sounds a buzzer for 10 seconds | ON/OFF |
| Unlock 2 Operation | ON*2/OFF*1 |
Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. | ON/OFF |
| Auto Lock Time | 30s | This function controls amount of time from unlocking doors to automatic re-locking function | 30s/60s/120s |
Tech Tips
*1: for RHD
*2: for LHD
| Display (Item) | Default | Contents | Setting |
|---|---|---|---|
| Panic Alarm Function* |
ON | Function to operate theft deterrent system by continuously pressing panic switch on transmitter for 0.8 seconds | ON/OFF |
Tech Tips
*: for RHD