POWER DOOR LOCK CONTROL SYSTEM SYSTEM DESCRIPTION


  1. POWER DOOR LOCK CONTROL SYSTEM DESCRIPTION


    1. The power door lock control system locks/unlocks all the doors.

      The master switch and the door control switch on the front passenger door send "lock/unlock" request signals to the main body ECU (instrument panel junction block). Then, the main body ECU (instrument panel junction block) sends these request signals to the lock motors in each door to lock/unlock all the doors at once in response to the inputs.

      Operating the driver's door lock using a mechanical key sends request signals to lock/unlock the doors to the main body ECU (instrument panel junction block).

  2. FUNCTION OF MAIN COMPONENT

    Component Function
    Power window master switch Door control switch on master switch locks/unlocks all doors.
    Door control switch Door control switch on front passenger side locks/unlocks all doors.
    Door courtesy switch Provided for each door. Detects door status (open or closed) and outputs data to main body ECU (instrument panel junction block). Turns on when door is opened and turns off when door is closed.
    Driver side door lock

    • Built-in motor locks/unlocks door.

    • Built-in door control switch (key-linked) detects door key operation's door status (locked or unlocked) and outputs data to main body ECU (instrument panel junction block).

    • Built-in position switch detects door status (locked or unlocked) and outputs data to main body ECU (instrument panel junction block). This switch turns off when door is locked and turns on when door is unlocked.
    Passenger side door lock

    • Built-in motor locks/unlocks door.

    • Built-in position switch detects door status (locked or unlocked) and outputs data to main body ECU (instrument panel junction block). This switch turns off when door is locked and turns on when door is unlocked.
    Rear LH and RH door locks

    • Built-in motor locks/unlocks door.

    • Built-in position switch detects door status (locked or unlocked) and outputs data to main body ECU (instrument panel junction block). This switch turns off when door is locked and turns on when door is unlocked.

  3. SYSTEM FUNCTION


    1. This system is controlled by the main body ECU (instrument panel junction block). The main body ECU (instrument panel junction block) outputs signals to each door lock motor. The door lock control system of the vehicle has the following functions:

      Function Outline
      Manual lock and unlock function This function can lock or unlock all doors by the door lock control switch operation.
      Key-linked lock and unlock function This function, which is linked with the mechanical key cylinder, can lock or unlock all the doors when a lock or unlock operation is effected.
      Manual unlock prohibition function

      Performing the door lock operation with an electrical key(*1)or a mechanical key(*2)will prohibit the unlock operation by the door lock control switch.
      Key lock-in prevention function

      If each door lock(*1)or driver's door lock(*2)operation is performed when the electrical key(*1)or mechanical key(*2)is in the cabin(*1)or ignition key cylinder(*2), all the doors will be unlocked.

      Shift-linked automatic door lock function(*4)

      When the conditions listed below are met consecutively, this function causes all the doors to be automatically locked.


      • The ignition switch is on (IG).

      • All doors are closed.

      • The shift lever is moved out of the P position.

      • Any of the doors are unlocked.

      Shift-linked automatic door unlock function(*4)

      		When the ignition switch is on (IG), if moving the shift lever to the P position from any other position, all the doors will be automatically unlocked.

      2-step unlock function(*5)

      		This function is provided to unlock the driver's door by turning the key cylinder once and to unlock the remaining doors by turning it twice.

      Speed-sensitive automatic door lock(*3)

      When conditions listed below are all met, this function causes all doors to automatically lock.


      • Vehicle speed is higher than approximately 20 km/h (13 mph).

      • All doors are closed.

      • The shift lever is moved to any position other than P or N.

      • Any one of the doors are unlocked.

      Opening driver's door-linked automatic door unlock(*3)

      		All doors are unlocked automatically when the driver's door is opened within 10 seconds after the ignition switch is turned off from on (IG).

      Tech Tips


      • *1: w/ Smart Entry and Start System

      • *2: w/o Smart Entry and Start System

      • *3: Default is OFF for LHD

      • *4: for LHD

      • *5: for RHD