WASHER NOZZLE ADJUSTMENT


  1. REMOVE WASHER NOZZLE SUB-ASSEMBLY


    1. A017FFRE01

      Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.

      Note

      Be careful not to damage the windshield.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A017D5X

      Remove the washer nozzle sub-assembly from the washer hose.

      Note

      Washer nozzles cannot be reused.

  2. ADJUST WASHER NOZZLE SUB-ASSEMBLY


    1. Select a washer nozzle sub-assembly so that the washer fluid spray area is as specitied.

      A017DAXE01

  3. INSTALL WASHER NOZZLE SUB-ASSEMBLY


    1. A017D5X

      Connect a new washer nozzle sub-assembly to the washer hose.

    2. A017C6XE01

      Engage the 2 claws and install the washer nozzle sub-assembly as shown in the illustration.