Click here

WASHER MOTOR (for Rear Side) INSPECTION

Click here
Click here
  1. Click here

    INSPECT REAR WASHER MOTOR AND PUMP ASSEMBLY


    1. Remove the washer jar.

    2. Disconnect the rear washer motor and pump connector.

      Tip:

      The check should be performed with the rear washer motor and pump installed on the washer jar.

    3. Fill the washer jar with washer fluid.

    4. A017BDEE01

      Connect the battery's positive (+) lead to terminal 1 of the rear washer motor and pump, and negative (-) lead to terminal 2.

    5. Check that washer fluid flows from the washer jar.

      OK
      Washer fluid flows from the washer jar.

      If the result is not as specified, replace the washer motor and pump assembly.