CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Turn the tester on.
Select the setting by referring to the table below.
| Display | Default | Contents | Setting |
|---|---|---|---|
| Unlock Key Twice(*2) |
ON | Function that unlocks only driver side door when driver side door key cylinder is turned to UNLOCK once, and unlock all doors when it is turned to UNLOCK twice. For OFF setting, turning it once unlocks all doors. | ON/OFF |
| Auto Lock/Shift(*1) |
ON | Function that locks all doors when shift lever is shifted to P from any other position with engine running and all doors closed | ON/OFF |
| Auto Unlock/Shift(*1) |
ON | Function that unlocks all doors when shift lever is shifted to P from any other position while the ignition switch is on (IG) | ON/OFF |
| All Unlock/Open-Close(*1) |
OFF | Function that unlocks all doors when opening driver door within 10 seconds after turning the ignition switch on (IG) | ON/OFF |
| Auto Lock(*1) |
OFF | Function that locks all doors when the vehicle reaches a certain speed | ON/OFF |
Tech Tips
*1: for LHD
*2: for RHD