WASHER MOTOR (for Front Side) INSPECTION


  1. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. Remove the washer jar.

    2. Disconnect the windshield washer motor and pump connector.

      Tech Tips

      The check should be performed with the windshield washer motor and pump installed on the washer jar.

    3. Fill the washer jar with washer fluid.

    4. A017BXHE01

      Connect the battery's positive (+) lead to terminal 1 of the windshield washer motor and pump, and negative (-) lead to terminal 2.

    5. Check that washer fluid flows from the washer jar.

      OK
      Washer fluid flows from the washer jar.

      If the result is not as specified, replace the washer motor and pump assembly.