REAR WIPER RUBBER INSTALLATION


  1. INSTALL REAR WIPER RUBBER


    1. A017BAKE03

      Install the rear wiper rubber backing plates as shown in the illustration.

      Note

      Install the backing plates facing the correct direction.

    2. Insert the wiper rubber from the front end of the wiper blade to the rear end through the second claw.

    3. A017EVSE03

      After pushing the wiper rubber through the rear end claw, allow it to stick out from the rear end stopper.

    4. A017EFZE01

      Slide the wiper rubber through the front end claw.

  2. INSTALL REAR WIPER BLADE ASSEMBLY


    1. A017BJ9

      Push the wiper blade straight toward the right side of the vehicle to install it to the wiper arm.

      Note

      Be careful not to damage the claw.

    2. A017DOH

      Connect the rear wiper head cap.