DOOR MIRROR FOOT LIGHT RELAY ON-VEHICLE INSPECTION


  1. INSPECT DOOR MIRROR FOOT LIGHT RELAY


    1. A017BZ1E86

      Remove the door mirror foot light relay from the No. 2 engine room relay block.

    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Condition Specified Condition
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Apply battery voltage between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the door mirror foot light relay.