FOG LIGHT RELAY ON-VEHICLE INSPECTION


  1. INSPECT FRONT FOG LIGHT RELAY


    1. A017BZ1E86

      Remove the front fog light relay from the center relay block.

    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Condition Specified Condition
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Apply the battery voltage between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the front fog light relay.

  2. INSPECT REAR FOG LIGHT RELAY


    1. A017BZ1E86

      Remove the rear fog light relay from the center relay block.

    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Condition Specified Condition
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Apply the battery voltage between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the rear fog light relay.