BACK DOOR COURTESY SWITCH INSPECTION


  1. INSPECT BACK DOOR LOCK ASSEMBLY (w/o Power Back Door)


    1. A017EJAE08

      Check the operation of the back door courtesy switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard resistance
        Tester Connection Switch Condition Specified Condition
        1 - 3 Lock 10 kΩ or higher
        Unlock Below 1 Ω

        If the result is not specified, replace the back door lock assembly.

  2. INSPECT BACK DOOR LOCK ASSEMBLY (w/ Power Back Door)


    1. Check the operation of the back door courtesy switch.

      A017BAFE01

      1. Measure the resistance according to the value(s) in the table below.

        Standard resistance
        Tester Connection Door Lock Latch Position Specified Condition
        3 - 4 Open-latch Below 1 Ω
        Half-latch Below 1 Ω
        Full-latch 10 kΩ or higher
        Over-latch 10 kΩ or higher

        If the result is not specified, replace the back door lock assembly.