HEADLIGHT LEVELING SWITCH INSPECTION


  1. INSPECT HEADLIGHT LEVELING SWITCH


    1. A017EB3E06
      Text in Illustration
      *1

      Component without harness connected

      (Headlight Leveling Switch)

      Connect a (+) lead from the battery to terminal 1 and a (-) lead to terminal 4.

    2. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Switch Position

      Specified Condition

      (Battery voltage is 12 V)
      2 - 1 0 10.44 to 11.16 V
      (0.5) 9.8 to 10.52 V
      1 9.16 to 9.88 V
      (1.5) 8.52 to 9.24 V
      2 7.88 to 8.6 V
      (2.5) 7.3 to 7.97 V
      3 6.6 to 7.32 V
      (3.5) 5.97 to 6.68 V
      4 5.32 to 6.04 V
      (4.5) 4.68 to 5.4 V
      5 4.04 to 4.76 V

      If the result is not as specified, replace the switch.

    3. Connect a (+) lead from the battery to terminal 3 and a (-) lead to terminal 4.

    4. Check that the illumination of the switch comes on.

      OK
      The illumination comes on.

      If the result is not as specified, replace the switch.