Click here

FRONT WIPER MOTOR INSTALLATION

Click here
Click here
  1. Click here

    INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)


    1. A017BRX

      Install the windshield wiper motor assembly with the 3 bolts.

      5.4 N*m 55 kgf*cm 48 in.*lbf

    2. Engage the clamp.

    3. A017BC1E01

      Align the matchmarks and install the crank arm assembly with the nut.

      17 N*m 173 kgf*cm 13 ft.*lbf
    4. A017EP4E01

      Apply MP grease to the crank arm pivot of the windshield wiper motor assembly.

    5. A017F0M

      Connect the rod of the windshield wiper link assembly to the crank arm pivot of the windshield wiper motor assembly.

  2. Click here

    INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)


    1. A017BLW

      Install the windshield wiper motor assembly with the 3 bolts.

      5.4 N*m 55 kgf*cm 48 in.*lbf
    2. A017FQ0E01

      Align the matchmarks and install the crank arm assembly with the nut.

      17 N*m 173 kgf*cm 13 ft.*lbf
    3. A017G7TE01

      Apply MP grease to the crank arm pivot of the windshield wiper motor assembly.

    4. A017DT3

      Connect the rod of the windshield wiper link assembly to the crank arm pivot of the windshield wiper motor assembly.

  3. Click here

    INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. A017FR2

      Install the windshield wiper motor and link assembly with the 4 bolts.

      7.0 N*m 71 kgf*cm 62 in.*lbf

    2. Connect the connector.

  4. Click here

    INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY


    1. A017F5J

      Engage the 20 claws.

    2. Install the cowl top ventilator louver sub-assembly with the 2 clips.

    3. A017EML

      Engage the 2 claws and connect the front fender to cowl side seal LH.

    4. A017F5E

      Engage the 2 claws and connect the front fender to cowl side seal RH.

  5. Click here

    INSTALL HOOD TO COWL TOP SEAL


    1. A017DKA

      Engage the 8 clips and install the hood to cowl top seal.

  6. Click here

    INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH


    1. Operate the wiper and stop the windshield wiper motor at the automatic stop position.

    2. When reinstalling:


      1. A017C5CE01

        Clean the wiper arm serrations.

      2. Clean the wiper pivot serrations with a wire brush.

    3. A017D7ZE01

      Install the front wiper arm and blade assembly RH with the nut to the position shown in the illustration.

      24 N*m 245 kgf*cm 18 ft.*lbf
      Tip:

      Hold the wiper arm by hand when tightening the nut.

      Area Measurement
      A 25.6 mm (1.00 in.)
  7. Click here

    INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH


    1. Operate the wiper and stop the windshield wiper motor at the automatic stop position.

    2. When reinstalling:


      1. A017C5CE01

        Clean the wiper arm serrations.

      2. Clean the wiper pivot serrations with a wire brush.

    3. A017D4VE01

      Install the front wiper arm and blade assembly LH with the nut to the position shown in the illustration.

      24 N*m 245 kgf*cm 18 ft.*lbf
      Tip:

      Hold the wiper arm by hand when tightening the nut.

      Area Measurement
      A 31.9 mm (1.26 in.)

    4. Operate the front wipers while spraying washer fluid onto the windshield glass. Make sure that the front wipers function properly and the wipers do not come into contact with the vehicle body.