VANITY LIGHT REMOVAL


  1. REMOVE REAR CENTER SEAT ASSEMBLY

  2. REMOVE REAR SEAT HEADREST ASSEMBLY (for LH Side)

  3. REMOVE SEAT TRACK BRACKET COVER LH


    1. A017DZY

      Disengage the 8 claws and remove the 2 rear seat track bracket covers.

  4. REMOVE REAR OUTER TRACK BRACKET COVER LH


    1. A017BNT

      Disengage the 4 claws and remove the rear outer track bracket cover.

  5. REMOVE REAR INNER TRACK BRACKET COVER LH


    1. A017FUU

      Disengage the 4 claws and remove the rear inner track bracket cover.

  6. REMOVE REAR SEAT LEG SIDE COVER LH


    1. A017BXU

      Disengage the 3 claws.

    2. Disengage the clip and remove the rear seat leg side cover.

  7. DISCONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY LH (w/ Remote Folding Function)


    1. Pull down the adjuster's lock piece to release the lock as shown in the illustration.

      A017BM1E01
    2. A017BWQE01

      Using a screwdriver wrapped with protective tape, disengage the 2 claws as shown in the illustration.

    3. Lift up the seat track adjusting handle to the uppermost position and hold the handle in this position as shown in the illustration.

      A017BFVE01

    4. Using a screwdriver wrapped with protective tape, disconnect the rear No. 1 seat lock cable assembly as shown in the illustration.

    5. Using a screwdriver wrapped with protective tape, disconnect the rear seat reclining control cable as shown in the illustration.

      A017FFKE01

    6. Secure the rear seat reclining control cable with the carpet hole as shown in the illustration.

  8. REMOVE REAR NO. 1 SEAT ASSEMBLY LH


    1. A017BHD

      Remove the 3 bolts on the rear side of the seat.

    2. A017FCR

      Remove the 2 bolts on the front side of the seat and the rear No. 1 seat assembly.

      Note

      Be careful not to damage the vehicle body.

  9. REMOVE REAR SEAT HEADREST ASSEMBLY (for RH Side)

  10. REMOVE REAR SEAT TRACK BRACKET COVER RH


    1. A017ERX

      Disengage the 8 claws and remove the 2 rear seat track bracket covers.

  11. REMOVE REAR OUTER TRACK BRACKET COVER RH


    1. A017D2L

      Disengage the 4 claws and remove the rear outer track bracket cover.

  12. REMOVE REAR INNER TRACK BRACKET COVER RH


    1. A017F59

      Disengage the 4 claws and remove the rear inner track bracket cover.

  13. REMOVE REAR SEAT LEG SIDE COVER RH


    1. A017F28

      Disengage the 3 claws.

    2. Disengage the clip and remove the rear seat leg side cover.

  14. DISCONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY RH (w/ Remote Folding Function)

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  15. REMOVE REAR NO. 1 SEAT ASSEMBLY RH


    1. A017EZ3

      Remove the 3 bolts on the rear side of the seat.

    2. A017D5O

      Remove the 2 bolts on the front side of the seat and the rear No. 1 seat assembly.

      Note

      Be careful not to damage the vehicle body.

  16. REMOVE FRONT DOOR SCUFF PLATE LH


    1. A017B6P

      Disengage the 8 claws and guide, and remove the front door scuff plate LH.

  17. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH


    1. A017G63

      Remove the clip.

    2. Disengage the clip and claw, and remove the cowl side trim sub-assembly LH.

  18. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. A017G5W

      Remove the front door opening trim weatherstrip LH.

  19. REMOVE FRONT PILLAR GARNISH LH


    1. A017FEQE01

      Pull the upper part of the garnish toward the inside of the cabin and disengage the 2 clips.

    2. Cut off the clip <A>.

    3. Disengage the 3 guides and remove the front pillar garnish LH.

    4. Remove the clip <A>.

    5. A017G92E01

      Protect the curtain shield airbag assembly.


      1. Cover the airbag with a 700 mm (27.56 in.) x 120 mm (4.72 in.) cloth or piece of nylon and fix the ends of the cover with tape, as shown in the illustration.

        Note

        Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.

  20. REMOVE REAR DOOR SCUFF PLATE LH


    1. A017D4T

      Disengage the 5 claws, 3 clips and guide, and remove the rear door scuff plate LH.

  21. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH


    1. A017C1V

      Remove the rear door opening trim weatherstrip LH.

  22. REMOVE FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  23. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  24. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  25. REMOVE FRONT PILLAR GARNISH RH


    1. A017G4EE01

      Pull the upper part of the garnish toward the inside of the cabin and disengage the 2 clips.

    2. Cut off the clip <A>.

    3. Disengage the 3 guides and remove the front pillar garnish RH.

    4. Remove the clip <A>.

    5. A017D95E01

      Protect the curtain shield airbag assembly.


      1. Cover the airbag with a 700 mm (27.56 in.) x 120 mm (4.72 in.) cloth or piece of nylon and fix the ends of the cover with tape, as shown in the illustration.

        Note

        Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.

  26. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  27. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  28. REMOVE LOWER CENTER PILLAR GARNISH LH


    1. A017F82

      Disengage the 2 claws and 2 clips, and remove the lower center pillar garnish LH.

  29. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH


    1. A017G6U

      Remove the bolt and disconnect the floor end of the front seat outer belt assembly.

  30. REMOVE CENTER PILLAR GARNISH LH


    1. A017B73

      Remove the screw and clip.

    2. Disengage the 2 guides and clip, and remove the center pillar garnish LH.

  31. REMOVE LOWER CENTER PILLAR GARNISH RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  32. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  33. REMOVE CENTER PILLAR GARNISH RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  34. REMOVE DECK BOARD ASSEMBLY


    1. A017CPI

      Remove the deck board assembly.

  35. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY


    1. A017F31

      Disengage the 2 guides and remove the No. 3 deck board sub-assembly.

  36. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY


    1. A017D36

      Disengage the 2 guides and remove the No. 2 deck board sub-assembly.

  37. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Remove the tonneau cover assembly.

  38. REMOVE REAR NO. 1 FLOOR BOARD (w/o Rear No. 2 Seat)


    1. A017CVI

      Disengage the 3 clips and the 3 guides, and remove the rear No. 1 floor board.

  39. REMOVE REAR SEAT SIDE COVER LH (w/ Rear No. 2 Seat)


    1. A017BBU

      Disengage the 2 clips and remove the rear seat side cover LH.

  40. REMOVE DECK SIDE TRIM BOX LH


    1. A017BZVE01

      Remove the 2 deck side trim clips and clip.

    2. Remove the deck side trim box LH as shown in the illustration.

      A017G2A

  41. REMOVE REAR SEAT SIDE COVER RH (w/ Rear No. 2 Seat)


    1. A017EH1

      Disengage the 2 clips and remove the rear seat side cover RH.

  42. REMOVE JACK CARRIER SUPPORT

  43. REMOVE JACK CARRIER CUSHION (for LHD)


    1. A017ENI

      Remove the jack carrier cushion.

  44. REMOVE JACK CARRIER CUSHION (for RHD)


    1. A017D41

      Remove the jack carrier cushion.

  45. REMOVE JACK ASSEMBLY (for LHD)


    1. A017EKS

      Remove the jack assembly.

  46. REMOVE JACK ASSEMBLY (for RHD)


    1. A017DSX

      Remove the jack assembly.

  47. REMOVE JACK CARRIER ASSEMBLY (for LHD)


    1. A017EAS

      Using a screwdriver, disengage the 3 claws and remove the jack carrier assembly.

  48. REMOVE JACK CARRIER ASSEMBLY (for RHD)


    1. A017D6R

      Using a screwdriver, disengage the 3 claws and remove the jack carrier assembly.

  49. REMOVE DECK SIDE TRIM BOX RH


    1. A017FOPE01

      Remove the 2 deck side trim clips and clip.

    2. Remove the deck side trim box RH as shown in the illustration.

      A017E9B

  50. REMOVE DECK FLOOR BOARD ASSEMBLY (w/o Rear No. 2 Seat)


    1. A017G15

      Remove the 4 bolts and 4 nuts.

    2. Remove the deck floor board assembly.

  51. REMOVE REAR MAT


    1. A017F51

      Remove the rear mat.

  52. REMOVE DECK FLOOR BOARD ASSEMBLY (w/ Rear No. 2 Seat)


    1. A017FMA

      Disengage the 3 claws.

    2. Remove the 2 nuts and the deck floor board assembly.

  53. REMOVE REAR DECK FLOOR BOX (w/o Rear No. 2 Seat)


    1. A017D8N

      Remove the 2 nuts and the deck floor box.

  54. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY (w/ Rear No. 2 Seat)


    1. A017GAE

      Remove the bolt and rear No. 2 seat inner belt assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  55. DISCONNECT REAR SEAT LAP TYPE BELT ASSEMBLY LH (w/ Rear No. 2 Seat)


    1. A017F2F

      Remove the bolt and disconnect the rear seat lap type belt assembly LH.

  56. DISCONNECT REAR SEAT LAP TYPE BELT ASSEMBLY RH (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  57. REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)


    1. A017E5S

      Remove the 4 bolts and the rear No. 2 seat assembly.

  58. REMOVE REAR FLOOR FINISH PLATE


    1. A017BSY

      Disengage the 4 clips and the 4 claws, and remove the rear floor finish plate.

  59. REMOVE DECK SIDE TRIM COVER NO.2


    1. A017FRQE01

      Using a screwdriver, disengage the 2 claws and remove the deck side trim cover LH.

      Tech Tips

      Tape the screwdriver tip before use.

  60. REMOVE DECK SIDE TRIM LH


    1. A017F36

      Remove the bolt.

    2. A017B91

      Disengage the 4 claws and the 3 guides, and remove the deck side trim LH as shown in the illustration.

  61. REMOVE SIDE TRIM COVER LH


    1. A017EO1

      Disengage the 10 claws and remove the side trim cover LH.

  62. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH


    1. A017EUZE01

      Using a screwdriver, disengage the 6 claws and 2 guides, and remove the rear combination light service cover LH.

      Tech Tips

      Tape the screwdriver tip before use.

  63. REMOVE REAR POWER POINT SOCKET ASSEMBLY


    1. Disconnect the connector.

    2. A017G8M

      Disengage the claw and remove the rear power point socket assembly.

  64. REMOVE REAR POWER OUTLET SOCKET COVER


    1. A017B0H

      Disengage the 2 claws and remove the rear power outlet socket cover.

  65. REMOVE REAR DECK TRIM COVER (w/o Remote Folding Function)


    1. A017EYF

      Disengage the 10 claws and remove the rear deck trim cover.

  66. REMOVE RECLINING REMOTE CONTROL LEVER BEZEL LH (w/ Remote Folding Function)


    1. A017FIS

      Disengage the 5 claws and remove the reclining remote control bezel LH.

  67. REMOVE ROPE HOOK ASSEMBLY (for LH Side)


    1. A017FLCE01

      for Front Side:


      1. Using a screwdriver, disengage the 2 claws.

        Tech Tips

        Tape the screwdriver tip before use.

      2. Remove the bolt and the rope hook assembly.

    2. A017B9EE01

      for Rear Side:


      1. Using a screwdriver, disengage the 2 claws.

        Tech Tips

        Tape the screwdriver tip before use.

      2. Remove the bolt and rope hook assembly.

  68. REMOVE NO. 2 DECK SIDE TRIM HOOK


    1. A017CPF

      Remove the screw and the No. 2 deck side trim hook.

  69. REMOVE FRONT DECK SIDE TRIM COVER LH


    1. A017C3ZE01

      Using a screwdriver, disengage the 4 claws and remove the 2 front deck side trim covers LH.

      Tech Tips

      Tape the screwdriver tip before use.

  70. DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH


    1. A017ETD

      Remove the bolt and disconnect the floor end of the rear No. 1 seat outer belt assembly.

  71. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    1. Remove the 2 bolts.

    2. Remove the 2 clips.

    3. Disengage the 7 claws and 4 clips, and remove the deck trim side panel assembly LH.

      A017FE0

  72. REMOVE QUARTER PILLAR GARNISH LH


    1. A017DVD

      Disengage the 2 claws and 2 guides, and remove the No. 1 seat outer belt guide.

    2. A017B6M

      Disengage the 2 clips and the 2 guides, and remove the quarter pillar garnish LH.

  73. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH (w/o Power Back Door)


    1. w/o Rear No. 2 Seat:


      1. A017ES0

        Remove the bolt.

      2. Disengage the 5 clips and 2 guides, and remove the roof side inner garnish assembly LH.

    2. w/ Rear No. 2 Seat:


      1. A017DAD

        Disengage the 2 claws and 2 guides, and remove the rear No. 2 seat outer belt guide.

      2. A017FTJ

        Remove the bolt.

      3. Disengage the 5 clips and 2 guides, and remove the roof side inner garnish assembly LH.

  74. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH (w/ Power Back Door)


    1. w/o Rear No. 2 Seat:


      1. A017E6D

        Remove the bolt.

      2. Disengage the 5 clips and 2 guides, and remove the roof side inner garnish assembly LH.

    2. w/ Rear No. 2 Seat:


      1. A017DAD

        Disengage the 2 claws and 2 guides, and remove the rear No. 2 seat outer belt guide.

      2. A017EMC

        Remove the bolt.

      3. Disengage the 5 clips and 2 guides, and remove the roof side inner garnish assembly LH.

  75. REMOVE REAR SEAT SIDE GARNISH CAP (w/o Rear Air Conditioning System)


    1. A017DMI

      Disengage the 8 claws and guide, and remove the rear seat side garnish cap.

  76. REMOVE REAR SEAT SIDE GARNISH CAP (w/ Rear Air Conditioning System)


    1. A017FP0

      Remove the screw.

    2. Disengage the 6 claws and the guide, and remove the rear seat side garnish cap.

  77. REMOVE DECK SIDE TRIM COVER NO.1

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  78. REMOVE DECK SIDE TRIM RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  79. REMOVE SIDE TRIM COVER RH (w/o Rear Automatic Air Conditioning System)


    1. A017CSI

      Disengage the 4 claws and remove the side trim cover RH.

  80. REMOVE REAR ROOM TEMPERATURE SENSOR (w/ Rear Automatic Air Conditioning System)


    1. A017B3P

      Disengage the 4 claws and remove the rear room temperature sensor.

    2. Disconnect the connector.

  81. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH


    1. A017BZ2E01

      Using a screwdriver, disengage the 6 claws and the 2 guides, and remove the rear combination light service cover RH.

      Tech Tips

      Tape the screwdriver tip before use.

  82. REMOVE ROPE HOOK ASSEMBLY (for RH Side)

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  83. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Tech Tips

    Use the same procedure for the No. 1 luggage compartment trim hook and the No. 2 deck side trim hook.

  84. REMOVE FRONT DECK SIDE TRIM COVER RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  85. DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  86. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH


    1. Remove the 3 bolts.

    2. Remove the 2 clips.

    3. Disengage the 7 claws and 4 clips, and remove the deck trim side panel assembly RH.

      A017FTC

  87. REMOVE QUARTER PILLAR GARNISH RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  88. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH (w/o Rear No. 2 Seat)

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  89. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  90. REMOVE ROOF CONSOLE BOX ASSEMBLY


    1. A017G1E

      Using a moulding remover, disengage the 2 clips, 3 guides and fastener.

    2. Disconnect the connector and remove the roof console box assembly.

  91. REMOVE VISOR BRACKET COVER (for LH Side)


    1. A017FET

      Using a moulding remover, disengage the 4 claws and remove the visor bracket cover.

  92. REMOVE VISOR ASSEMBLY LH


    1. A017BSF

      Remove the 2 screws and remove the visor assembly LH.

  93. REMOVE VISOR BRACKET COVER (for RH Side)

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  94. REMOVE VISOR ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  95. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)


    1. A017DH8E01

      Disengage the 2 claws and slide the inner rear view mirror stay holder cover as shown in the illustration.

    2. A017E8X

      Disengage the 2 claws and remove the inner rear view mirror stay holder cover.

  96. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Standard)


    1. A017BUTE02

      Using a screwdriver, disengage the 4 claws and remove the lens cover.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A017DOVE01

      Using a screwdriver, disengage the 2 claws <A> as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    3. Disengage the 2 claws <B>.

    4. A017D1Z

      Using a screwdriver, disengage the 4 claws and remove the No. 1 room light assembly.

  97. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Independent Type)


    1. A017EM6E01

      Using a screwdriver, disengage the 4 claws and remove the lens cover.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A017EBAE01

      Using a screwdriver, disengage the 2 claws <A> as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    3. Disengage the 2 claws <B>.

    4. A017C7P

      Using a screwdriver, disengage the 8 claws and remove the No. 1 room light assembly.

  98. REMOVE NO. 2 ROOM LIGHT ASSEMBLY


    1. A017BUTE02

      Using a screwdriver, disengage the 4 claws and remove the lens cover.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A017DOVE01

      Using a screwdriver, disengage the 2 claws <A> as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    3. Disengage the 2 claws <B>.

    4. A017D1Z

      Using a screwdriver, disengage the 4 claws and remove the No. 2 room light assembly.

  99. REMOVE TELEVISION BASE (w/ Rear Seat Entertainment System)


    1. A017BXW

      Disengage the 4 clips and remove the television base.

  100. REMOVE TELEVISION DISPLAY ASSEMBLY (w/ Rear Seat Entertainment System)


    1. Disconnect the connector.

    2. A017E98

      Remove the 4 bolts.

    3. A017ETX

      Disengage the 2 clips and 2 claws, and then remove the television display.

  101. REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY (w/o Sliding Roof)


    1. A017EIPE01

      Using a clip remover, disengage the 4 claws.

      Note

      Do not forcibly pry the assist grip covers to prevent them from being deformed.

      Tech Tips


      • Gently pry on the assist grip covers as shown in the illustration to remove them.

      • Tape the clip remover tip before use.

    2. A017DIC

      Pull off the 2 assist grip covers by hand.

    3. Disengage the 2 clips and remove the front assist grip sub-assembly.

    4. Remove the 2 clips from the vehicle body.

      Tech Tips

      Use the same procedure for the RH side and the LH side.

  102. REMOVE REAR ASSIST GRIP SUB-ASSEMBLY (w/o Sliding Roof)


    1. A017DR3E01

      Using a clip remover, disengage the 4 claws.

      Note

      Do not forcibly pry the assist grip covers to prevent them from being deformed.

      Tech Tips


      • Gently pry on the assist grip covers as shown in the illustration to remove them.

      • Tape the clip remover tip before use.

    2. Pull off the 2 assist grip covers by hand.

    3. A017CJX

      Disengage the 2 clips and remove the rear assist grip sub-assembly.

    4. Remove the 2 clips from the vehicle body.

      Tech Tips

      Use the same procedure for the RH side and the LH side.

  103. REMOVE ASSIST GRIP ASSEMBLY (w/ Sliding Roof)


    1. A017BF4E01

      Using a screwdriver, disengage the 6 claws and remove the 2 assist grip covers.

      Note

      Do not forcibly pry the assist grip covers to prevent them from being deformed.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A017DWA

      Disengage the 4 clips and remove the assist grip assembly.

    3. Remove the 4 clips from the vehicle body.

      Tech Tips

      Use the same procedure for the other 4 assist grips.

  104. REMOVE ROOF HEADLINING TRIM CLIP STOPPER


    1. A017EX6E01

      Using a screwdriver, disengage the 3 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Remove the bolt and the roof headlining trim clip stopper.

      Tech Tips

      Use the same procedure for the RH side and the LH side.

  105. REMOVE SUN ROOF OPENING TRIM MOULDING (w/ Sliding Roof)

  106. REMOVE VISOR HOLDER


    1. A017FUKE01

      Turn the visor holder approximately 45° and pull it out as shown in the illustration.

    2. Disengage the 2 claws and remove the visor holder.

      Tech Tips

      Use the same procedure for the RH side and the LH side.

  107. REMOVE ROOF HEADLINING ASSEMBLY (w/o Sliding Roof)


    1. Disconnect the No. 1 roof wire connector and disengage the 3 clamps from the front pillar LH.

    2. Disconnect the No. 2 antenna cord sub-assembly connector, disengage the 3 clamps, and remove the bolt from the front pillar RH.

    3. Disconnect the No. 2 antenna cord sub-assembly connector from the rear pillar RH.

    4. Remove the 4 clips.

      A017ER8E01
    5. A017EOO

      Remove the roof headlining assembly from the vehicle through the back door.

      Note

      Do not damage the roof headlining assembly or body interior.

  108. REMOVE ROOF HEADLINING ASSEMBLY (w/ Sliding Roof)


    1. Disconnect the No. 1 roof wire connectors and disengage the 3 clamps from the front pillar LH.

    2. w/ Rear Seat Entertainment System:


      1. Disconnect the No. 1 roof wire connector from the rear pillar LH.

    3. Disconnect the No. 2 antenna cord sub-assembly connector, disengage the 3 clamps and remove the bolt from the front pillar RH.

    4. Disconnect the No. 2 antenna cord sub-assembly connector from the rear pillar RH.

    5. Disconnect the sliding roof drive gear connector.

    6. Remove the 3 clips.

      A017FCLE01
    7. A017BD9

      Remove the roof headlining assembly from the vehicle through the back door.

      Note

      Do not damage the roof headlining assembly or body interior.

  109. REMOVE VANITY LIGHT ASSEMBLY


    1. A017EVJE01

      Disengage the 2 claws <A> and separate the bulb holder from the vanity light assembly as shown in the illustration.

    2. Disengage the claw <B> and remove the vanity light assembly.

      Tech Tips

      Use the same procedure to remove the light on the other side.