Click here

IGNITION KEY CYLINDER LIGHT INSTALLATION

Click here
Click here
  1. Click here

    INSTALL KEY CYLINDER LIGHT ASSEMBLY (w/o Engine Immobiliser System)


    1. A017DSJ

      Align the key cylinder light assembly with the upper bracket. Tilt the amplifier slightly and slide it into the position as shown in the illustration.

    2. Push the key cylinder light assembly to install it to the upper bracket with the 2 claws.

      Note:

      Do not push the amplifier with excessive force.

  2. Click here

    INSTALL TRANSPONDER KEY AMPLIFIER (w/ Engine Immobiliser System)


    1. A017BM6

      Align the transponder key amplifier with the upper bracket. Tilt the amplifier slightly and slide it into the position as shown in the illustration.

    2. Push the transponder key amplifier to install it to the upper bracket with the 2 claws.

      Note:

      Do not push the amplifier with excessive force.

  3. Click here

    INSTALL STEERING COLUMN COVER


    1. A017BUM

      Engage the claw and install the upper steering column cover.

    2. A017FPF

      Engage the 2 claws and install the lower steering column cover.

    3. A017D0F

      Turn the steering wheel assembly to the left and install the screw as shown in the illustration.

      2.0 N*m 20 kgf*cm 18 in.*lbf
    4. A017DEV

      Turn the steering wheel assembly to the right and install the screw as shown in the illustration.

      2.0 N*m 20 kgf*cm 18 in.*lbf