IGNITION KEY CYLINDER LIGHT REMOVAL


  1. REMOVE STEERING COLUMN COVER


    1. A017DEV

      Turn the steering wheel assembly to the right and remove the screw as shown in the illustration.

    2. A017D0F

      Turn the steering wheel assembly to the left and remove the screw as shown in the illustration.

    3. A017FPF

      Disengage the 2 claws and remove the lower steering column cover.

    4. A017BUM

      Disengage the claw and remove the upper steering column cover.

  2. REMOVE TRANSPONDER KEY AMPLIFIER


    1. A017CHO

      Using a screwdriver, widen the claws hanging onto the upper bracket by approximately 1.0 mm (0.039 in.).

    2. Pull out the transponder key amplifier with the claw open.

      Note

      Using excessive force may damage the case.