Click here

ROOM LIGHT ASSEMBLY (for Rear) INSPECTION

Click here
Click here
  1. Click here

    INSPECT NO. 2 ROOM LIGHT ASSEMBLY


    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Condition Specified Condition
      Q9-2 - Body ground Always Below 1 Ω

      If the result is not as specified, repair or replace harness or connector.

    2. Measure the voltage according to the value(s) in the table below.

      Standard voltage
      Tester Connection Condition Specified Condition
      Q9-1 - Body ground Always 11 to 14 V

      If the result is not as specified, repair or replace the harness or connector.