Click here

DOOR MIRROR FOOT LIGHT INSTALLATION

Click here
Click here
  1. Click here

    INSTALL OUTER MIRROR COVER


    1. A017G93

      Engage the 8 claws to install the outer mirror cover to the outer rear view mirror assembly with cover.

      Note:

      If there is a gap between the cover and the mirror body, it may cause noise during driving.

  2. Click here

    INSTALL OUTER MIRROR GLASS (w/o Heater)


    1. A017CD2

      Engage the 2 claws on the upper part of the outer mirror glass to the outer mirror.

    2. A017DO1

      Engage the 2 claws on the lower part of the outer mirror glass to the outer mirror as shown in the illustration.

  3. Click here

    INSTALL OUTER MIRROR GLASS (w/ Heater)


    1. A017CIU

      Connect the connectors.

    2. A017CD2

      Engage the 2 claws on the upper part of the outer mirror glass to the outer mirror.

    3. A017DO1

      Engage the 2 claws on the lower part of the outer mirror glass to the outer mirror as shown in the illustration.

  4. Click here

    INSTALL OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER


    1. A017FZCE01

      Engage the claw, and temporarily install the outer rear view mirror assembly with cover.

    2. Tighten the 3 nuts in the order shown in the illustration to install the outer rear view mirror assembly with cover.

      8.0 N*m 82 kgf*cm 71 in.*lbf
    3. A017CEJ

      Engage the clamp and connect the connector.

    4. Install the clip.

  5. Click here

    INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. Connect the connector.

    2. A017F3J

      Connect the front door lock remote control cable and front door inside locking cable to the front door inside handle sub-assembly.

    3. Engage the 2 clamps.

    4. A017FU9

      Engage the front door trim board with the 5 claws on the front door inner glass weatherstrip.

    5. Engage the 9 clips.

    6. A017FDZE01

      Install the 2 screws <B>.

    7. Install the screw <A> and front door trim board to the front door panel.

      3.5 N*m 36 kgf*cm 31 in.*lbf
  6. Click here

    INSTALL COURTESY LIGHT ASSEMBLY


    1. Connect the connector.

    2. A017CHJ

      Engage the claw and install the courtesy light assembly.

  7. Click here

    INSTALL ASSIST GRIP COVER


    1. A017EGS

      Engage the 4 claws and install the assist grip cover.

  8. Click here

    INSTALL FRONT ARMREST UPPER BASE PANEL


    1. Connect the connector.

    2. A017DCH

      Engage the 7 claws and clip and install the front armrest upper base panel.

  9. Click here

    INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG


    1. A017ERK

      Engage the 3 claws and install the front door inside handle bezel plug.

  10. Click here

    INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH


    1. A017CI2

      Engage the clip and claw, and install the front door lower frame bracket garnish.