Click here

LICENSE PLATE LIGHT ASSEMBLY INSPECTION

Click here
Click here
  1. Click here

    INSPECT LICENSE PLATE LIGHT ASSEMBLY


    1. A017DL4E02

      Disconnect the T2 connector from the license plate light.

    2. Measure the voltage according to the value(s) in the table below.

      Standard voltage
      Tester Connection Condition Specified Condition
      T2-1 - T2-2 Light control switch in TAIL 11 to 14 V
      T2-1 - T2-2 Light control switch OFF Below 1 V

      If the result is not as specified, repair or replace the wire harness or connector.