REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY


  1. REMOVE REAR BUMPER SIDE SUPPORT


    1. A017FYS

      Disengage the claw and remove the rear bumper side support.

  2. REMOVE REAR COMBINATION LIGHT BODY GASKET


    1. A017FHI

      Remove the rear combination light body gasket.

      Note


      • Be sure to remove all traces of the old gasket from the body.

      • Do not reuse the removed gasket. Be sure to install a new rear combination light body gasket to prevent water ingress.

  3. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A017BM3

      Turn the rear turn signal light bulb and the rear turn signal light socket in the direction indicated by the arrow and remove them as a unit.

    2. Remove the rear turn signal light bulb from the rear turn signal light socket.

  4. REMOVE TAIL AND STOP LIGHT BULB


    1. A017E27

      Turn the tail and stop light bulb and the tail and stop light socket in the direction indicated by the arrow and remove them as a unit.

    2. Remove the tail and stop light bulb from the tail and stop light socket.

  5. REMOVE BACK UP LIGHT BULB


    1. A017BJL

      Turn the back up light bulb and the back up light socket in the direction indicated by the arrow and remove them as a unit.

    2. Remove the back up light bulb from the back up light socket.