REAR COMBINATION LIGHT ASSEMBLY REMOVAL


  1. REMOVE REAR DOOR SCUFF PLATE LH


    1. A017D4T

      Disengage the 5 claws, 3 clips and guide, and remove the rear door scuff plate LH.

  2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH


    1. A017C1V

      Remove the rear door opening trim weatherstrip LH.

  3. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  4. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  5. REMOVE DECK BOARD ASSEMBLY


    1. A017CPI

      Remove the deck board assembly.

  6. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY


    1. A017F31

      Disengage the 2 guides and remove the No. 3 deck board sub-assembly.

  7. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY


    1. A017D36

      Disengage the 2 guides and remove the No. 2 deck board sub-assembly.

  8. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Remove the tonneau cover assembly.

  9. REMOVE REAR NO. 1 FLOOR BOARD (w/o Rear No. 2 Seat)


    1. A017CVI

      Disengage the 3 clips and 3 guides, and remove the rear No. 1 floor board.

  10. REMOVE REAR SEAT SIDE COVER LH (w/ Rear No. 2 Seat)


    1. A017BBU

      Disengage the 2 clips and remove the rear seat side cover LH.

  11. REMOVE DECK SIDE TRIM BOX LH


    1. A017BZVE01

      Remove the 2 deck side trim clips and clip.

    2. Remove the deck side trim box LH as shown in the illustration.

      A017G2A

  12. REMOVE REAR SEAT SIDE COVER RH (w/ Rear No. 2 Seat)


    1. A017EH1

      Disengage the 2 clips and remove the rear seat side cover RH.

  13. REMOVE JACK CARRIER SUPPORT

  14. REMOVE JACK CARRIER CUSHION (for LHD)


    1. A017ENI

      Remove the jack carrier cushion.

  15. REMOVE JACK CARRIER CUSHION (for RHD)


    1. A017D41

      Remove the jack carrier cushion.

  16. REMOVE JACK ASSEMBLY (for LHD)


    1. A017EKS

      Remove the jack assembly.

  17. REMOVE JACK ASSEMBLY (for RHD)


    1. A017DSX

      Remove the jack assembly.

  18. REMOVE JACK CARRIER ASSEMBLY (for LHD)


    1. A017EAS

      Using a screwdriver, disengage the 3 claws and remove the jack carrier assembly.

  19. REMOVE JACK CARRIER ASSEMBLY (for RHD)


    1. A017D6R

      Using a screwdriver, disengage the 3 claws and remove the jack carrier assembly.

  20. REMOVE DECK SIDE TRIM BOX RH


    1. A017FOPE01

      Remove the 2 deck side trim clips and clip.

    2. Remove the deck side trim box RH as shown in the illustration.

      A017E9B

  21. REMOVE DECK FLOOR BOARD ASSEMBLY (w/o Rear No. 2 Seat)


    1. A017G15

      Remove the 4 bolts and 4 nuts.

    2. Remove the deck floor board assembly.

  22. REMOVE REAR MAT


    1. A017F51

      Remove the rear mat.

  23. REMOVE DECK FLOOR BOARD ASSEMBLY (w/ Rear No. 2 Seat)


    1. A017FYN

      Disengage the 3 claws.

    2. Remove the 2 nuts and deck floor board assembly.

  24. REMOVE REAR DECK FLOOR BOX (w/o Rear No. 2 Seat)


    1. A017D8N

      Remove the 2 nuts and the deck floor box.

  25. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY (w/ Rear No. 2 Seat)


    1. A017DQY

      Remove the bolt and rear No. 2 seat inner belt assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  26. DISCONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH (w/ Rear No. 2 Seat)


    1. A017DK9

      Remove the bolt and disconnect the rear No. 2 seat outer belt assembly LH.

  27. DISCONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure as for the LH side.

  28. REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)


    1. Remove the bolt on the front of the seat.

      A017E17

    2. Remove the 6 bolts on the rear of the seat and the rear No. 2 seat assembly.

      A017CU1

  29. REMOVE REAR FLOOR FINISH PLATE


    1. A017BSY

      Disengage the 4 clips and 4 claws, and remove the rear floor finish plate.

  30. REMOVE DECK SIDE TRIM COVER NO.2


    1. A017FRQE01

      Using a screwdriver, disengage the 2 claws and remove the deck side trim cover LH.

      Tech Tips

      Tape the screwdriver tip before use.

  31. REMOVE DECK SIDE TRIM LH


    1. A017F36

      Remove the bolt.

    2. A017B91

      Disengage the 4 claws and 3 guides, and remove the deck side trim LH as shown in the illustration.

  32. REMOVE SIDE TRIM COVER LH


    1. A017EO1

      Disengage the 10 claws and remove the side trim cover LH.

  33. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH


    1. A017EUZE01

      Using a screwdriver, disengage the 6 claws and 2 guides, and remove the rear combination light service cover LH.

      Tech Tips

      Tape the screwdriver tip before use.

  34. REMOVE REAR POWER POINT SOCKET ASSEMBLY


    1. Disconnect the connector.

    2. A017G8M

      Disengage the claw and remove the rear power point socket assembly.

  35. REMOVE REAR POWER OUTLET SOCKET COVER


    1. A017B0H

      Disengage the 2 claws and remove the rear power outlet socket cover.

  36. REMOVE REAR DECK TRIM COVER (w/o Remote Folding Function)


    1. A017EYF

      Disengage the 10 claws and remove the rear deck trim cover.

  37. REMOVE RECLINING REMOTE CONTROL BEZEL LH (w/ Remote Folding Function)


    1. A017FIS

      Disengage the 5 claws and remove the reclining remote control lever bezel LH.

  38. REMOVE ROPE HOOK ASSEMBLY (for LH Side)


    1. A017FLCE01

      for Front Side:


      1. Using a screwdriver, disengage the 2 claws.

        Tech Tips

        Tape the screwdriver tip before use.

      2. Remove the bolt and rope hook assembly.

    2. A017B9EE01

      for Rear Side:


      1. Using a screwdriver, disengage the 2 claws.

        Tech Tips

        Tape the screwdriver tip before use.

      2. Remove the bolt and rope hook assembly.

  39. REMOVE NO. 2 DECK SIDE TRIM HOOK


    1. A017CPF

      Remove the screw and No. 2 deck side trim hook.

  40. REMOVE FRONT DECK SIDE TRIM COVER LH


    1. A017C3ZE01

      Using a screwdriver, disengage the 4 claws and remove the 2 front deck side trim covers LH.

      Tech Tips

      Tape the screwdriver tip before use.

  41. DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH


    1. A017ETD

      Remove the bolt and disconnect the floor end of the rear No. 1 seat outer belt assembly.

  42. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    1. Remove the 2 bolts.

    2. Remove the 2 clips.

    3. Disengage the 7 claws and 4 clips, and remove the deck trim side panel assembly LH.

      A017FE0

  43. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH (w/o Power Back Door)


    1. w/o Rear No. 2 Seat:


      1. A017ES0

        Remove the bolt.

      2. Disengage the 5 clips and 2 guides, and remove the roof side inner garnish assembly LH.

    2. w/ Rear No. 2 Seat:


      1. A017DAD

        Disengage the 2 claws and 2 guides, and remove the rear No. 2 seat outer belt guide.

      2. A017FTJ

        Remove the bolt.

      3. Disengage the 5 clips and 2 guides, and remove the roof side inner garnish assembly LH.

  44. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH (w/ Power Back Door)


    1. w/o Rear No. 2 Seat:


      1. A017E6D

        Remove the bolt.

      2. Disengage the 5 clips and 2 guides, and remove the roof side inner garnish assembly LH.

    2. w/ Rear No. 2 Seat:


      1. A017DAD

        Disengage the 2 claws and 2 guides, and remove the rear No. 2 seat outer belt guide.

      2. A017EMC

        Remove the bolt.

      3. Disengage the 5 clips and 2 guides, and remove the roof side inner garnish assembly LH.

  45. REMOVE REAR SEAT SIDE GARNISH CAP (w/o Rear Air Conditioning System)


    1. A017DMI

      Disengage the 8 claws and guide, and remove the rear seat side garnish cap.

  46. REMOVE REAR SEAT SIDE GARNISH CAP (w/ Rear Air Conditioning System)


    1. A017FP0

      Remove the screw.

    2. Disengage the 6 claws and the guide, and remove the rear seat side garnish cap.

  47. REMOVE DECK SIDE TRIM COVER NO.1

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  48. REMOVE DECK SIDE TRIM RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  49. REMOVE SIDE TRIM COVER RH (w/o Rear Automatic Air Conditioning System)


    1. A017CSI

      Disengage the 4 claws and remove the side trim cover RH.

  50. REMOVE REAR ROOM TEMPERATURE SENSOR (w/ Rear Automatic Air Conditioning System)


    1. A017B3P

      Disengage the 4 claws and remove the rear room temperature sensor.

    2. Disconnect the connector.

  51. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH


    1. A017BZ2E01

      Using a screwdriver, disengage the 6 claws and 2 guides, and remove the rear combination light service cover RH.

      Tech Tips

      Tape the screwdriver tip before use.

  52. REMOVE ROPE HOOK ASSEMBLY (for RH Side)

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  53. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Tech Tips

    Use the same procedure for the No. 1 luggage compartment trim hook and the No. 2 deck side trim hook.

  54. REMOVE FRONT DECK SIDE TRIM COVER RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  55. DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  56. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH


    1. Remove the 3 bolts.

    2. Remove the 2 clips.

    3. Disengage the 7 claws and 4 clips, and remove the deck trim side panel assembly RH.

      A017FTC

  57. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH (w/o Rear No. 2 Seat)

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  58. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedure for the RH side and the LH side.

  59. REMOVE REAR QUARTER PANEL MUDGUARD LH


    1. A017D6ZE01

      Remove the 2 screws (A).

    2. Using a 4 mm hexagon wrench, remove the 3 screws (B).

  60. REMOVE REAR QUARTER PANEL MUDGUARD RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  61. REMOVE REAR BUMPER ASSEMBLY


    1. A017EIIE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear bumper assembly.

    2. A017ECL

      Remove the 2 screws.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    3. A017EEA

      Remove the 5 clips, 2 screws and 2 bolts.

    4. A017DD7

      Disengage the 7 claws and disconnect the rear bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. w/ Rear Fog Light:


      1. Disconnect the rear fog light connector, and remove the rear bumper assembly.

  62. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    1. A017BPF

      Disconnect the connectors.

    2. Remove the 2 nuts.

    3. A017E3PE01

      Remove the screw.

    4. Disengage the 2 pins and guide, and remove the rear combination light assembly.

      Text in Illustration
      *1 Pin
      *2 Guide