REAR COMBINATION LIGHT ASSEMBLY ON-VEHICLE INSPECTION


  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY


    1. A017C0TE07

      Disconnect the connectors from the rear combination light assembly.

    2. Measure the voltage according to the value(s) in the table below.

      Standard voltage
      LH Side
      Tester Connection Condition Specified Condition
      O48-1 - O48-2 Light control switch OFF Below 1 V
      Light control switch in TAIL 11 to 14 V
      O48-1 - O48-3 Brake pedal released Below 1 V
      Brake pedal depressed 11 to 14 V
      O46-1 - O46-2 Turn signal switch OFF Below 1 V
      Ignition switch on (IG) and Turn signal switch in LH 11 to 14 V (60 to 120 times per minute)
      O44-1 - O44-2 Shift lever not in R Below 1 V
      Shift lever in R 11 to 14 V
      RH Side
      Tester Connection Condition Specified Condition
      O49-1 - O49-2 Light control switch OFF Below 1 V
      Light control switch in TAIL 11 to 14 V
      O49-1 - O49-3 Brake pedal released Below 1 V
      Brake pedal depressed 11 to 14 V
      O47-1 - O47-2 Turn signal switch OFF Below 1 V
      Ignition switch on (IG) and Turn signal switch in LH 11 to 14 V (60 to 120 times per minute)
      O45-1 - O45-2 Shift lever not in R Below 1 V
      Shift lever in R 11 to 14 V

      If the result is not as specified, there is a malfunction on the wire harness side.