Click here

HEADLIGHT ASSEMBLY REMOVAL

Click here
Click here
  1. Click here

    REMOVE COOL AIR INTAKE DUCT SEAL


    1. A017F7H

      Remove the 11 clips and cool air intake duct seal.

  2. Click here

    REMOVE RADIATOR GRILLE SUB-ASSEMBLY


    1. A017D07E01

      Put protective tape around the radiator grille sub-assembly.

      Table 1. Text in Illustration
      *1 Protective Tape
    2. A017DG7

      Remove the 6 clips.

    3. Disengage the 8 claws and 2 guides, and remove the radiator grille sub-assembly.

  3. Click here

    REMOVE FRONT BUMPER ASSEMBLY


    1. A017FKEE01

      Put protective tape around the front bumper assembly.

      Table 2. Text in Illustration
      *1 Protective Tape
    2. A017FKDE01

      Remove the screw.

      Tip:

      Use the same procedure for the RH side and LH side.

    3. Using a screwdriver, turn the pin 90 degrees and remove the 2 pin hold clips.

      Tip:

      Use the same procedure for the RH side and LH side.

    4. A017BXG

      Remove the 8 screws and 3 clips.

    5. A017FXI

      Disengage the 5 claws and disconnect the front bumper assembly.

      Tip:

      Use the same procedure for the RH side and LH side.

    6. Disconnect each fog light connector, and then remove the front bumper assembly.

  4. Click here

    REMOVE HEADLIGHT ASSEMBLY


    1. A017CL7

      Disengage the guide as shown in the illustration.

    2. A017G7Z

      Remove the bolt and 2 screws.

    3. Disengage the claw.

    4. Disconnect the connectors and clamp, and remove the headlight assembly.