LIGHTING SYSTEM CUSTOMIZE PARAMETERS

Tech Tips

The following items can be customized.

Note


  • Before attempting to customize vehicle settings, confirm whether it is possible to make the change that the customer has requested.

  • Be sure to record the current value before customizing.

  • Before troubleshooting the lighting system, pay attention because there is a possibility that a function has been disabled by customizing. (Example: If "The wireless operation does not function", check that the wireless operation has not been disabled by customizing, then perform the troubleshooting.)

Illuminated Entry:
Display Default Contents Setting
Lighting Time 15 s

Changes the lighting time of the personal light, interior lights and ignition key cylinder light*1/engine switch illumination*2after closing all of the doors. (It will quickly fade out when the ignition switch is turned on (IG))

7.5 s / 15 s / 30 s
I/L when ACC OFF ON

Lights up the personal light, interior lights and ignition key cylinder light*1/engine switch illumination*2when the ignition switch is turned from on (ACC or IG) to off.

ON / OFF
I/L ON W/Door Key Unlock ON

Lights up the personal light, interior lights and ignition key cylinder light*1/engine switch illumination*2when the doors are unlocked using the mechanical key.

ON / OFF
Mirr-Foot-Lgt Approached ON Lights up the door mirror foot lights when the key enters actuation area around the doors. ON / OFF
Mirr-Foot-Lgt Unlocked ON Lights up the door mirror foot lights when the doors are unlocked using door control transmitter or mechanical key. ON / OFF
Mirr-Foot-Lgt w/Master SW ON Lights up the door mirror foot lights when the doors are unlocked with the door control switch. ON / OFF
Mirror Foot Light Time 15 s Changes the lighting time of the door mirror foot lights. 0 s / 7.5 s / 15 s / 30 s

Tech Tips


  • *1: w/o Smart Entry and Start System

  • *2: w/ Smart Entry and Start System

Light Control:
Display Default Contents Setting
Response Time Normal Changes the delay timing of lighting the taillight when going into a tunnel when the light control switch is in the AUTO position. Long / Normal
Sensitivity Normal Adjusts the sensitivity of the automatic light control function. Light2 / Light1 / Normal / Dark1 / Dark2
Disp Ex ON Sen Normal Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light, and clock. Light2 / Light1 / Normal / Dark1 / Dark2
Disp Ex OFF Sen Normal Changes the ambient brightness level required to cancel the dimming of the combination meter indicator lights, A/C indicator light, and clock. Light2 / Light1 / Normal / Dark1 / Dark2