TRANSPONDER KEY AMPLIFIER (w/o Smart Entry and Start System) INSTALLATION


  1. INSTALL TRANSPONDER KEY AMPLIFIER


    1. A017BM6

      Align the transponder key amplifier with the upper bracket. Tilt the amplifier slightly and slide it into the position as shown in the illustration.

    2. Push the transponder key amplifier to install it to the upper bracket with the 2 claws.

      Note

      Do not push the amplifier with excessive force.

  2. INSTALL STEERING COLUMN COVER


    1. A017BQ8

      Engage the claw to install the upper steering column cover.

    2. A017D1F

      Engage the 2 claws to install the lower steering column cover.

    3. A017BZ5

      Install the 2 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }