Click here

ENGINE IMMOBILISER SYSTEM (w/o Smart Entry and Start System) DTC CHECK / CLEAR

Click here
Click here
Click here

  1. CHECK DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to the ON position.

    3. Turn the tester on.

    4. Read the DTCs by following the directions on the tester screen.

      Tip:

      Refer to the intelligent tester operator's manual for further details.

  2. CLEAR DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to the ON position.

    3. Turn the tester on.

    4. Erase the DTCs by following the directions on the tester screen.

      Tip:

      Refer to the intelligent tester operator's manual for further details.