Click here

REAR NO. 2 SEAT OUTER BELT ASSEMBLY INSTALLATION

Click here
Click here
  1. Click here

    INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY


    1. If a new rear No. 2 seat outer belt assembly is used:


      1. Install a new rear seat lap type belt assembly to a new rear No. 2 seat outer belt assembly.

        Note:

        After installing the belt, check that it is not twisted.

    2. A017BVZE01

      Install the rear No. 2 seat outer belt assembly with the 2 bolts.

      Bolt <A>
      7.5 N*m 77 kgf*cm 66 in.*lbf
      Bolt <B>
      42 N*m 428 kgf*cm 31 ft.*lbf
    3. A017FL4

      Connect the shoulder anchor of the rear No. 2 seat outer belt assembly with the bolt.

      42 N*m 428 kgf*cm 31 ft.*lbf
  2. Click here

    INSTALL ROOF SIDE INNER GARNISH ASSEMBLY (w/o Power Back Door)


    1. w/ Rear No. 2 Seat:


      1. A017FTJ

        Engage the 2 guides and 5 clips.

      2. Install the roof side inner garnish assembly LH with the bolt.

      3. A017DAD

        Engage the 2 guides and 2 claws, and install the No. 2 seat outer belt guide.

    2. w/o Rear No. 2 Seat:


      1. A017ES0

        Engage the 2 guides and 5 clips.

      2. Install the roof side inner garnish assembly LH with the bolt.

  3. Click here

    INSTALL ROOF SIDE INNER GARNISH ASSEMBLY (w/ Power Back Door)


    1. w/ Rear No. 2 Seat:


      1. A017EMC

        Engage the 2 guides and 5 clips.

      2. Install the roof side inner garnish assembly LH with the bolt.

      3. A017DAD

        Engage the 2 guides and 2 claws, and install the No. 2 seat outer belt guide.

    2. w/o Rear No. 2 Seat:


      1. A017E6D

        Engage the 2 guides and 5 clips.

      2. Install the roof side inner garnish assembly LH with the bolt.

  4. Click here

    INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)


    1. Engage the 4 clips and 7 claws.

    2. Install the 2 clips.

    3. A017FE0

      Install the deck trim side panel assembly LH with the 2 bolts.

  5. Click here

    INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)


    1. Engage the 4 clips and 7 claws.

    2. Install the 2 clips.

    3. A017FTC

      Install the deck trim side panel assembly RH with the 3 bolts.

  6. Click here

    INSTALL FRONT DECK SIDE TRIM COVER


    1. A017EJB

      Engage the 4 claws and install the 2 front deck side trim covers LH.

  7. Click here

    INSTALL NO. 2 DECK SIDE TRIM HOOK (for LH Side)


    1. A017CPF

      Install the No. 2 deck side trim hook with the screw.

  8. Click here

    INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side)

    Tip:

    Use the same procedure for the No. 1 luggage compartment trim hook and the No. 2 deck side trim hook.

  9. Click here

    INSTALL ROPE HOOK ASSEMBLY


    1. A017D0J

      for Front Side:


      1. Install the rope hook assembly with the bolt.

        6.5 N*m 66 kgf*cm 58 in.*lbf

      2. Engage the 2 claws.

    2. A017DHF

      for Rear Side:


      1. Install the rope hook assembly with the bolt.

        6.5 N*m 66 kgf*cm 58 in.*lbf

      2. Engage the 2 claws.

  10. Click here

    INSTALL REAR DECK TRIM COVER (for LH Side without Remote Folding Function)


    1. A017EYF

      Engage the 10 claws to install the rear deck trim cover.

  11. Click here

    INSTALL RECLINING REMOTE CONTROL LEVER BEZEL LH (for LH Side with Remote Folding Function)


    1. A017FIS

      Engage the 5 claws to install the reclining remote control lever bezel LH.

  12. Click here

    INSTALL REAR POWER OUTLET SOCKET COVER (for LH Side)


    1. A017B0H

      Engage the 2 claws and install the rear power outlet socket cover.

  13. Click here

    INSTALL REAR POWER POINT SOCKET ASSEMBLY (for LH Side)


    1. A017BVH

      Engage the claw and install the rear power point socket assembly.

    2. Connect the connector.

  14. Click here

    INSTALL REAR COMBINATION LIGHT SERVICE COVER LH (for LH Side)


    1. A017BGW

      Engage the 2 guides and 6 claws, and install the rear combination light service cover LH.

  15. Click here

    INSTALL REAR COMBINATION LIGHT SERVICE COVER RH (for RH Side)


    1. A017DDV

      Engage the 2 guides and 6 claws, and install the rear combination light service cover RH.

  16. Click here

    INSTALL SIDE TRIM COVER RH (for RH Side without Rear Automatic Air Conditioning System)


    1. A017CSI

      Engage the 4 claws, and install the side trim cover RH.

  17. Click here

    INSTALL REAR ROOM TEMPERATURE SENSOR (for RH Side with Rear Automatic Air Conditioning System)


    1. Connect the connector.

    2. A017B3P

      Engage the 4 claws and install the rear room temperature sensor.

  18. Click here

    INSTALL SIDE TRIM COVER LH (for LH Side)


    1. A017EO1

      Engage the 10 claws and install the side trim cover LH.

  19. Click here

    INSTALL DECK SIDE TRIM


    1. A017BAR

      Engage the 3 guides and 4 claws as shown in the illustration.

    2. A017F36

      Install the deck side trim LH with the bolt.

  20. Click here

    INSTALL DECK SIDE TRIM COVER


    1. A017BA5

      Engage the 2 claws and install the deck side trim cover LH.

  21. Click here

    INSTALL REAR SEAT SIDE GARNISH CAP (for RH Side without Rear Air Conditioning System)


    1. A017FDU

      Engage the guide and 8 claws, and install the rear seat side garnish cap.

  22. Click here

    INSTALL REAR SEAT SIDE GARNISH CAP (for RH Side with Rear Air Conditioning System)


    1. A017ER4

      Engage the guide and 6 claws.

    2. Install the rear seat side garnish cap with the screw.

  23. Click here

    INSTALL REAR FLOOR FINISH PLATE


    1. A017BSY

      Engage the 4 clips and 4 claws, and install the rear floor finish plate.

  24. Click here

    INSTALL REAR NO. 2 SEAT ASSEMBLY


    1. A017CU1

      Install the 6 bolts on the rear of the seat.

      37 N*m 377 kgf*cm 27 ft.*lbf
    2. A017E17

      Install the rear No. 2 seat assembly with the bolt.

      37 N*m 377 kgf*cm 27 ft.*lbf
  25. Click here

    INSTALL CENTER SEAT CUSHION COVER SUB-ASSEMBLY


    1. A017BX8E01

      Engage the 2 claws <B>.

    2. Engage the 2 claws <A> to install the center seat cushion cover sub-assembly.

  26. Click here

    INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH


    1. A017DK9E01

      Route the rear No. 2 seat outer belt assembly LH through the rubber band as shown in the illustration.

      Table 1. Text in Illustration
      *1 Rubber Band

    2. Install the rear No. 2 seat outer belt assembly LH with the bolt.

      42 N*m 428 kgf*cm 31 ft.*lbf
      Note:

      After installing the belt, check that it is not twisted.

  27. Click here

    INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  28. Click here

    INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY


    1. Install the rear No. 2 seat inner belt assembly with the bolt.

      42 N*m 428 kgf*cm 31 ft.*lbf
      Tip:

      Use the same procedure for the RH side and LH side.

  29. Click here

    INSTALL DECK FLOOR BOARD ASSEMBLY


    1. A017FYN

      Install the rear deck floor board assembly with the 4 nuts and 4 bolts.

  30. Click here

    INSTALL REAR MAT


    1. A017F51

      Install the rear mat.

  31. Click here

    INSTALL DECK SIDE TRIM BOX LH


    1. A017CIY

      Install the deck side trim box LH as shown in the illustration.

    2. A017BZVE01

      Install the 2 deck side trim clips and clip.

  32. Click here

    INSTALL REAR SEAT SIDE COVER LH


    1. A017BBU

      Engage the 2 clips and install the rear seat side cover LH.

  33. Click here

    INSTALL DECK SIDE TRIM BOX RH


    1. A017EFK

      Install the deck side trim box RH as shown in the illustration.

    2. A017FOPE01

      Install the 2 deck side trim clips and clip.

  34. Click here

    INSTALL JACK CARRIER ASSEMBLY (for LHD)


    1. A017FWH

      Engage the 3 claws, and install the jack carrier assembly.

  35. Click here

    INSTALL JACK CARRIER ASSEMBLY (for RHD)


    1. A017G4W

      Engage the 3 claws, and install the jack carrier assembly.

  36. Click here

    INSTALL JACK ASSEMBLY (for LHD)


    1. A017EKS

      Install the jack assembly.

  37. Click here

    INSTALL JACK ASSEMBLY (for RHD)


    1. A017DSX

      Install the jack assembly.

  38. Click here

    INSTALL JACK CARRIER CUSHION (for LHD)


    1. A017ENI

      Install the jack carrier cushion.

  39. Click here

    INSTALL JACK CARRIER CUSHION (for RHD)


    1. A017D41

      Install the jack carrier cushion.

  40. Click here

    INSTALL JACK CARRIER SUPPORT

  41. Click here

    INSTALL REAR SEAT SIDE COVER RH


    1. A017EH1

      Engage the 2 clips and install the rear seat side cover RH.

  42. Click here

    INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  43. Click here

    INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY


    1. A017D36

      Engage the 2 guides and install the No. 2 deck board sub-assembly.

  44. Click here

    INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY


    1. A017F31

      Engage the 2 guides and install the No. 3 deck board sub-assembly.

  45. Click here

    INSTALL DECK BOARD ASSEMBLY


    1. A017CPI

      Install the deck board assembly.

  46. Click here

    CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP

  47. Click here

    INSTALL REAR DOOR SCUFF PLATE


    1. A017D4T

      Engage the guide, 3 clips and 5 claws, and install the rear door scuff plate LH.